I was SO CLOSE to being done with my GBZ. Sound works, wifi works, the whole nine yards.
Then, I go to put the two halves together. This is where it all went downhill.
The screen begins to flicker and fade. Weird, must be a power issue. I check all my connections and everything is fine. I look at the driver board for the display...there is a part that is coming off. Crap. I solder it back on, we are all good.
Now my wifi doesn't work? Weird. I wipe my SD card a few times. Nothing. I plug the adapter into a PC and Mac...No signs of life. Oh well, Amazon refunds me. I get my roms and everything loaded using a Pi3 and then put the SD card back in my pi0. Everything is good. I go to put the two halves together...screen begins to flicker on and off continuously... Now that part from before has fallen completely off.
So, here I am ordering a new screen.
Note: always always always make sure things aren't cramped inside the gameboy.
Edit: Due to some gift cards, at least the screen was free this time -.-
Need to share my frustration...
- arunBarnard
- Posts: 15
- Joined: Sun Oct 23, 2016 10:11 am
- Has thanked: 2 times
- Been thanked: 2 times
Re: Need to share my frustration...
I feel for you. I out my two halves together to find a capacitor on the screen board hit the external USB port and wouldn't go together. My headphone/speaker switcher didn't work and my WiFi didn't either.
I fixed the Wifi and the first issue, but had to abandon the headphone speaker switch.
I fixed the Wifi and the first issue, but had to abandon the headphone speaker switch.
-
- Posts: 219
- Joined: Wed Nov 16, 2016 3:04 am
- Location: UK
- Has thanked: 3 times
- Been thanked: 73 times
Re: Need to share my frustration...
starting my build soon, hopefully things are plain sailing for me but can see things going downhill easily
Who is online
Users browsing this forum: No registered users and 1 guest