New members, introduce yourself!

Talk about anything and everything... Just be nice.
User avatar
WiringGuru
Posts: 1
Joined: Fri Jan 19, 2018 3:01 pm

Re: New members, introduce yourself!

Post by WiringGuru » Thu Jan 25, 2018 2:38 pm

Hi I'm WiringGuru (Dayton). Don't let the name fool you, I am very new to the world of electronics. I found this site while looking into raspberry pi's during class (I'm currently a senior in high school looking to major in mechanical engineering) and thought it seemed like a cool talent to have under my belt once I go off to college. I'm currently taking dual credit advanced electronics which has given me some understanding of wiring up projects and making sure that they are neat and tidy. Although I haven't completed any electronics project yet, unless you count wiring up a Mr. Potato Head to have red glowing eyes, I'm hoping to learn a lot about this community and the basics of circuits and programming.

Florian
Posts: 9
Joined: Thu Jan 11, 2018 2:19 pm
Been thanked: 2 times

Re: New members, introduce yourself!

Post by Florian » Sun Jan 28, 2018 5:04 am

Hello everyone,

I am Florian and I am in France. Since many months, I think about Game Boy Zero and now, I decided to start.

I discovered this forum as a result of tutoring you tube. Your forum is an important source of information but that is not obvious to treat for me because ... I do not speak English (I know, we French are not good in foreign languages) and google translation is my friend.

User avatar
YaYa
Posts: 1965
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 914 times
Been thanked: 814 times
Contact:

Re: New members, introduce yourself!

Post by YaYa » Sun Jan 28, 2018 5:15 am

Florian wrote:
Sun Jan 28, 2018 5:04 am
Hello everyone,

I am Florian and I am in France. Since many months, I think about Game Boy Zero and now, I decided to start.

I discovered this forum as a result of tutoring you tube. Your forum is an important source of information but that is not obvious to treat for me because ... I do not speak English (I know, we French are not good in foreign languages) and google translation is my friend.
Hi, and welcome to the forum ! Si tu galères, n'hésites pas à me contacter, je suis français :mrgreen: ;)

Florian
Posts: 9
Joined: Thu Jan 11, 2018 2:19 pm
Been thanked: 2 times

Re: New members, introduce yourself!

Post by Florian » Sun Jan 28, 2018 11:33 am

Merci pour ta proposition!

User avatar
psycost
Posts: 8
Joined: Fri Jan 05, 2018 8:34 am
Has thanked: 1 time
Been thanked: 2 times

Re: New members, introduce yourself!

Post by psycost » Wed Feb 14, 2018 7:13 am

Hi I'm Anders, a london based software developer.

I've done a few pi projects in the past including self updating digital signage, photo booths and the usual LAMP server kind of things.

I'm starting to get back into the hardware and modding side of things and have been lurking here to learn, but figured I should join and start engaging with the community.

lAndresl
Posts: 7
Joined: Tue Feb 13, 2018 11:50 am
Has thanked: 5 times
Been thanked: 2 times

Re: New members, introduce yourself!

Post by lAndresl » Wed Feb 14, 2018 7:43 am

Hey Guys!

My Name Is Andres, I am a Colombian systems engineer, currently working in the Networking arena (I work for Cisco, you know the internet and stuff...).
I am also an Electronics Technician, I have worked with some national GPS tracking services here in my country and also had some job experience in a University here.

I had some time out of the tinkering and modding because of my job, the last project I had was like 2 years ago, it was a Drone built with an alienwii board, programmed on Arduino. but nothing more than that, one Led Cube and things like it, nothing like the stuff i did during my studies, I didn't have much time to spend on that.

I came across the MintyPi a few months ago (right after origamy boys kits were sold out) and got into it, really liked the concept, but then again, as I was dealing with some other stuff, didn't get a chance to dive in.

I now have more spare time and can spend it doing something like this, I really like tinkering and making things and I see that this forum is really friendly and that really motivated me to get involved.

Anyway, sorry for the long post and yeah, that's a little bit about me.

Artley24
Posts: 3
Joined: Sun Feb 18, 2018 3:57 pm

Re: New members, introduce yourself!

Post by Artley24 » Sun Feb 18, 2018 4:05 pm

Hello everyone! My name is Arthur I live in Austin,TX working as an Engineer with a big semiconductor company. I've gotten to the point of boredom with work not challenging enough to keep my brain tinkering and while searching for a project I came upon this site. Got a lot of Ideas :D

User avatar
tinkerBOY
Posts: 529
Joined: Tue May 30, 2017 4:00 am
Has thanked: 253 times
Been thanked: 145 times

Re: New members, introduce yourself!

Post by tinkerBOY » Sun Feb 18, 2018 4:41 pm

Welcome to the forum! Search and ask coz all the important info about building your first GBZ are here. :) Good luck!

Mr.Modd
Posts: 2
Joined: Sun Feb 18, 2018 8:03 am

Re: New members, introduce yourself!

Post by Mr.Modd » Sun Feb 18, 2018 6:10 pm

Well since I just joined today,

Hi, I'm Connor "Mr. Modd" Danz, I'm an American teenager who wants to work on his own gaming/tech projects an love the Raspberry pi. I have very recently got into the tech scene and I'm learning a lot from this place already so stay tuned for my projects!

Mr.Modd
Posts: 2
Joined: Sun Feb 18, 2018 8:03 am

Re: New members, introduce yourself!

Post by Mr.Modd » Sun Feb 18, 2018 6:15 pm

Well since I'm new,

Hi, I'm Connor "Mr. Modd" Danz and I'm a teenager from New York. I've been wanting to get into the tech scene and I have very recently been learning about pi stuff and I plan on making my own Projects so keep out for me on youtube and the forums.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest