{SOLD} 640x480 3.5" high resolution screen - US ONLY

[AustenFM]

-SOLD-

Screen runs off 5v so it's ready to pop in your GBZ with minimal modifications!. For more details on this display please refer to these posts for more info:

http://www.sudomod.com/forum/viewtopic. ... 2347#p2347

http://www.sudomod.com/forum/viewtopic. ... t=50#p2472

http://www.sudomod.com/forum/viewtopic. ... it=640+480

Thanks!

[AustenFM]

Pay day bump! Screen and board are still available~ Snag it while you can!!

[abrugsch]

that damage is just the cap for the inductor. I have a pi with a similarly broken inductor. the important part is that the coil isn't damaged. the ferrite core might affect the inductance by a few picoHenrys but within the bounds of a few percent of it's rated inductance. and even if it were a problem it could be replaced easily enough... it looks like it's a 220uH inductor

[AustenFM]

that damage is just the cap for the inductor. I have a pi with a similarly broken inductor. the important part is that the coil isn't damaged. the ferrite core might affect the inductance by a few picoHenrys but within the bounds of a few percent of it's rated inductance. and even if it were a problem it could be replaced easily enough... it looks like it's a 220uH inductor

You are correct! The damage is only on the cap and the coil is just fine, and the screen works great. I haven't tested it with a Pizero but hooking it up to my SNES and using a 5v power supply I saw no issues. The clarity compared to a standard 320x240 screen is incredible~