[WANTED] JP2 connector that fits the Powerboost battery port

[Popcorn]

Looking to trade or buy at least 1 and up to a max of 3 of these JP2 connectors. I have lots of component parts I could offer for trade or buy if it's cheap. PM me?

[Fleder]

Same here, i've got one, but it does not fit the PowerBoost 1000 Charger.
I would love to trade or buy one, that fits. Can't seem to find the right one anywhere.

[Kilren]

Looking to trade or buy at least 1 and up to a max of 3 of these JP2 connectors. I have lots of component parts I could offer for trade or buy if it's cheap. PM me?

I haven't tried these, so I can't vouch for them. But you should only be needing 2-ph JST mini micro's.
These have the male and female, so if they're off even by 1mm, you can bend the terminals slightly and solder them on the PB1000c

Amazon JST

[jlane52641]

I've got 50 coming from china should be here in the next couple days

2.0_2PIN_120MM_1_zpsluphuymt.jpg (93.19 KiB) Viewed 12500 times

happy to send out to anyone who covers shipping

the description is: Mini Micro JST 2.0 PH 2-Pin Connector plug with Wires Cables

I guessed hoping they are correct but won't know for sure til I get them in my hands

[Thijs852]

image.jpeg (1.84 MiB) Viewed 12494 times

I have two sizez bigger ones and smaller one, also have some with no wire attached. If you need them pm me! I haven't got my powerboost yet so i won't be able to test them, but you can send me te size so I can measure them

[yves1984]

I've got 50 coming from china should be here in the next couple days2.0_2PIN_120MM_1_zpsluphuymt.jpg

happy to send out to anyone who covers shipping

the description is: Mini Micro JST 2.0 PH 2-Pin Connector plug with Wires Cables

I guessed hoping they are correct but won't know for sure til I get them in my hands

I order the same one from Aliexpress

[Fleder]

@Thijs852 & jlane52641
Thank you, if you can confirmt that they are fitting the adafruit powerboost, i would gladly order 2 or 3 of them.

Thanks for sharing!

[Thijs852]

@Thijs852 & jlane52641
Thank you, if you can confirmt that they are fitting the adafruit powerboost, i would gladly order 2 or 3 of them.

Thanks for sharing!

Do you have the adafruit powerboost? If so can you tell me what size the jsy connector is?

[Fleder]

Do you have the adafruit powerboost? If so can you tell me what size the jsy connector is?

Yeah, sure.
It looks like there is space for a connector that is
4,5mm wide and 3,5mm high, without this little nub in the middle.
[spoiler="picture"][/spoiler]

[Thijs852]

Yeah, sure.
It looks like there is space for a connector that is
4,5mm wide and 3,5mm high, without this little nub in the middle.

Well, turns out I have the right ones, I have 20 to 30 to spare. So if you need them contact me!