[For Sale] GBZ All In One PCB (Pre Orders V2)Sold Out!
Posted: Wed Jul 20, 2016 3:52 pm
So guys as I mentioned in the other topic I will Setup pre-orders for a pre-assembled board from a PCB Fabricator so they should all be 100% correct and will be a quick turn around but I need at least 30 pre-orders to go with the purchase. If there isn't 30 Pre-orders I'll simply refund the people who did do the preorder (the sooner the 30 is reached the sooner I can order them).
This pre order is for the the Board with the USB Hub, the one WITHOUT the Hub I will do on a smaller scale and probably through PM.
Here is what a complete board looks like:
Price is $35 plus $4 shipping SOLD OUT !!
Image
The preorder was from Thursday the 11th to Sunday the 14th and is now closed, but I do have an extra 50 boards coming so you can grab one of those when I put them up for sale on Wednesday Sept 7th and 8th at 3pm Eastern Time.
No I will not take reservations for them so don't ask.
Tuesday September 6th is when the Preorder Boards arrive in my hands, after I get them I need to program them and will start shipping them starting Wednesday and throughout the week. When I ship your board out you will get an email with the tracking info, if you didn't get an email then it means I haven't gotten to your order yet so be patient.
The Board has the following built in:
1.X&Y Button Drill template
2.PWM Audio Filter (you NEED to Program the config.txt to use PWM Audio)
3.Headphone/Speaker Amp
4.Atmega32U4 MCU to handle controls and Analog Stick (already preprogrammed!)
5.USB Hub (3 free ports,1 is connected to atmega32U4)
Image
Image
Analog Fix : This is for the first batch orders only and NOT the PREORDERS
If you have random movements with the Controller chances are you aren't using an Analog Stick and need to apply this quick fix. Use two (2) 0.1uf Ceramic Disc capacitors in the points below or use a wire instead of the caps to ground the points:
Image
Capacitor can be bought here:
http://www.taydaelectronics.com/capacit ... f-863.html
Programming Files:
If looking to reprogram the board get a USBasp Programmer for the ease and speed of it, it's only $3 (guide coming soon):
http://www.ebay.com/itm/5V-AVR-Programm ... xyIPNTcZHK
Programming Guide using Arduino IDE
viewtopic.php?f=25&t=1176
Driver install for using the All in One in Arduino IDE:
https://github.com/sparkfun/Arduino_Boards
Wiring thanks to @a3k4 for the 3 most used Headphone Sockets:
viewtopic.php?f=22&p=12261#p12261
This pre order is for the the Board with the USB Hub, the one WITHOUT the Hub I will do on a smaller scale and probably through PM.
Here is what a complete board looks like:
Price is $35 plus $4 shipping SOLD OUT !!
Image
The preorder was from Thursday the 11th to Sunday the 14th and is now closed, but I do have an extra 50 boards coming so you can grab one of those when I put them up for sale on Wednesday Sept 7th and 8th at 3pm Eastern Time.
No I will not take reservations for them so don't ask.
Tuesday September 6th is when the Preorder Boards arrive in my hands, after I get them I need to program them and will start shipping them starting Wednesday and throughout the week. When I ship your board out you will get an email with the tracking info, if you didn't get an email then it means I haven't gotten to your order yet so be patient.
The Board has the following built in:
1.X&Y Button Drill template
2.PWM Audio Filter (you NEED to Program the config.txt to use PWM Audio)
3.Headphone/Speaker Amp
4.Atmega32U4 MCU to handle controls and Analog Stick (already preprogrammed!)
5.USB Hub (3 free ports,1 is connected to atmega32U4)
Image
Image
Analog Fix : This is for the first batch orders only and NOT the PREORDERS
If you have random movements with the Controller chances are you aren't using an Analog Stick and need to apply this quick fix. Use two (2) 0.1uf Ceramic Disc capacitors in the points below or use a wire instead of the caps to ground the points:
Image
Capacitor can be bought here:
http://www.taydaelectronics.com/capacit ... f-863.html
Programming Files:
If looking to reprogram the board get a USBasp Programmer for the ease and speed of it, it's only $3 (guide coming soon):
http://www.ebay.com/itm/5V-AVR-Programm ... xyIPNTcZHK
Programming Guide using Arduino IDE
viewtopic.php?f=25&t=1176
Driver install for using the All in One in Arduino IDE:
https://github.com/sparkfun/Arduino_Boards
Wiring thanks to @a3k4 for the 3 most used Headphone Sockets:
viewtopic.php?f=22&p=12261#p12261