AIO 2.2A [SOLD OUT] Sale Thread
Posted: Mon Nov 14, 2016 2:41 pm
The AIO Boards (V2.2A) are up for sale until sold out (50 units), I did some trace rerouting to avoid damage from shipping and I also broke out 4 additional analog pins (can be converted to Digital also) to be used as a second analog stick or a battery monitor or whatever people can come up with and also went to 75ohm resistors for stereo combining. Everything else will be the same as the previous 2.2/2.0.
Orders placed Tuesday 4/4//17 and later will be processed this weekend as I need to swap some resistors that the manufacturer mistakenly used and this takes a bit of time to do by hand. Preorders are still being processed which is why there is a wait time for the orders being taken today.
AIO 2.2A
Price is $40 plus $5 shippingSOLD OUT
The Board has the following built in:
1.X&Y Button Drill template
2.PWM Audio Filter (you NEED to Program the config.txt to use PWM Audio)
3.Headphone/Speaker Amp
4.Built in Headphone Socket with proper Stereo mixed into the Mono Speaker Output
5.Atmega32U4 MCU to handle controls and Analog Stick (already preprogrammed but not for analog stick unless requested)
6.USB Hub (3 free ports,1 is connected to atmega32U4) Must set the usb to 1.1 speed for wifi unless using the Pi Zero W
7.Power Strip built in to the lower right hand of the board to power all your devices.
8. 4 Additional pads on the back near the Atmega32u4 for an additional analog stick (must be programmed for it) or other analog or digital buttons or comparitors.
Repaired AIO I'm no longer taking orders for these and will offer them when I have a bunch on hand but NO ETA.
Build videos using the AIO 2.2 thanks to @Chedda
https://www.youtube.com/watch?v=Xfb5ctp ... zJLXF1i5YO
The final board 2.2A is white but I had a few made for me and the testers that I hand assembled but here is how it'll look: (This is not the repaired board!)
Wiring Diagram
Orders placed Tuesday 4/4//17 and later will be processed this weekend as I need to swap some resistors that the manufacturer mistakenly used and this takes a bit of time to do by hand. Preorders are still being processed which is why there is a wait time for the orders being taken today.
AIO 2.2A
Price is $40 plus $5 shippingSOLD OUT
The Board has the following built in:
1.X&Y Button Drill template
2.PWM Audio Filter (you NEED to Program the config.txt to use PWM Audio)
3.Headphone/Speaker Amp
4.Built in Headphone Socket with proper Stereo mixed into the Mono Speaker Output
5.Atmega32U4 MCU to handle controls and Analog Stick (already preprogrammed but not for analog stick unless requested)
6.USB Hub (3 free ports,1 is connected to atmega32U4) Must set the usb to 1.1 speed for wifi unless using the Pi Zero W
7.Power Strip built in to the lower right hand of the board to power all your devices.
8. 4 Additional pads on the back near the Atmega32u4 for an additional analog stick (must be programmed for it) or other analog or digital buttons or comparitors.
Repaired AIO I'm no longer taking orders for these and will offer them when I have a bunch on hand but NO ETA.
Build videos using the AIO 2.2 thanks to @Chedda
https://www.youtube.com/watch?v=Xfb5ctp ... zJLXF1i5YO
The final board 2.2A is white but I had a few made for me and the testers that I hand assembled but here is how it'll look: (This is not the repaired board!)
Wiring Diagram
