[For Sale] Soldering Service
Posted: Mon Jan 29, 2018 1:38 pm
Hello,
I've seen way too many people struggle with soldering their builds and figured I'd offer my services to those who need it.
Here's what I'm currently offering:
mintyPi soldering service - $40 + return shipping
Send me your clean mintyPi PCB and Raspberry Pi0w and I will solder your Pi0 to your mintyPi PCB. If you include your SD card I will flash it with the latest mintyPi OS and plug it into the Pi so you don't have to worry about breaking a connection to insert the card. *I will not install any ROMs*
Please note - I will only validate that the mintyPi boots properly and every GPIO has a proper connection. Connections may break when you insert / remove the mintyPi pcb from the tin and screw it down and that is not covered by this service.
Raspberry Pi3 de-soldering service - $50 to start + options + return shipping
Send me your unmodified Raspberry Pi3 and I will remove the USB ports, Ethernet, Camera, Monitor, and Audio. If you'd like the GPIO pins removed it will cost an additional $15. I will not remove the power port and HDMI because I need to test functionality before I send it back. I will not cut your Pi3 down with a dremel.
I'm also open to special requests. Please PM me the details.
PayPal friends and family only and please PM me if you're interested.
Some of my work:
Expand the spoilers for more photos
I've seen way too many people struggle with soldering their builds and figured I'd offer my services to those who need it.
Here's what I'm currently offering:
mintyPi soldering service - $40 + return shipping
Send me your clean mintyPi PCB and Raspberry Pi0w and I will solder your Pi0 to your mintyPi PCB. If you include your SD card I will flash it with the latest mintyPi OS and plug it into the Pi so you don't have to worry about breaking a connection to insert the card. *I will not install any ROMs*
Please note - I will only validate that the mintyPi boots properly and every GPIO has a proper connection. Connections may break when you insert / remove the mintyPi pcb from the tin and screw it down and that is not covered by this service.
Raspberry Pi3 de-soldering service - $50 to start + options + return shipping
Send me your unmodified Raspberry Pi3 and I will remove the USB ports, Ethernet, Camera, Monitor, and Audio. If you'd like the GPIO pins removed it will cost an additional $15. I will not remove the power port and HDMI because I need to test functionality before I send it back. I will not cut your Pi3 down with a dremel.
I'm also open to special requests. Please PM me the details.
PayPal friends and family only and please PM me if you're interested.
Some of my work:
- 20171229_141355.jpg (3.55 MiB) Viewed 3559 times
SpoilerShow
- 20180128_100914.jpg (3.52 MiB) Viewed 3561 times
- 20180128_104853.jpg (3.82 MiB) Viewed 3561 times
- 20171229_155506.jpg (3.82 MiB) Viewed 3561 times
- 20171101_103018.jpg (3.87 MiB) Viewed 3561 times
- 20171210_152301.jpg (3.58 MiB) Viewed 3561 times
