Page 1 of 1

SOLD Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Mon Oct 15, 2018 10:22 pm
by AntFJ
Please PM me if you are interested in start/select back buttons. The board is a modification of the gen 1 Kite's Circuit Sword back board. I found these buttons to be fairly comfortable - I think for small hands they would be great. I typically wear medium gloves.

STL FILES HERE https://sudomod.com/forum/viewtopic.php?f=58&t=5424

GERBER FILE HERE
Gerber_Start-Select Back Board.zip
(37.49 KiB) Downloaded 264 times
20180311_161534.jpg
20180311_161534.jpg (2.22 MiB) Viewed 7640 times
I only have ~8 of these boards available. I can provide the printed parts, the board, the screw, and the drill guide as well as the drill bits (1mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm) without too much of an increase cost. The physical buttons would need to be purchased/cut by you. There is no point in me buying start/select buttons only to re-sell them to you (especially if you want a different color).

PLA filament colors available are silver and pink... if you want a different color I will need to charge a tiny bit more to help fund the addition of a new color.

If you are interested please PM me with your name and address and I'll give you my PayPal. The price will be $20 including shipping.
20181015_201418.jpg
20181015_201418.jpg (318.66 KiB) Viewed 7678 times
20181015_203406.jpg
20181015_203406.jpg (159.72 KiB) Viewed 7678 times
20181015_203414.jpg
20181015_203414.jpg (131.46 KiB) Viewed 7678 times
20181015_203558.jpg
20181015_203558.jpg (1.03 MiB) Viewed 7678 times
If you just want the board, the price is $4 to pay for packaging/shipping.

First come first serve until i run out

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Tue Oct 16, 2018 10:24 am
by Ziploc99
Interested

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Tue Oct 16, 2018 10:39 am
by AntFJ
Ziploc99 wrote:
Tue Oct 16, 2018 10:24 am
Interested
PM me with what you want and your address and I'll give you my PayPal.

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Wed Oct 17, 2018 6:01 am
by Robochris
Interested. Pm sent

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Wed Oct 17, 2018 9:08 am
by gambino37
Also interested. Pm sent.

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Sat Oct 20, 2018 12:07 pm
by Parkerrocker
I'm interested in a couple of the PCBs, but looks like I got here too late.
Where did you get those? Did you custom order them? Are you willing to share the design files?

It seems like with the button pad layout on the Start / Select buttons, the two contacts would work better than the v1.0b version he has made available on GitHub.

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Sat Oct 20, 2018 8:00 pm
by AntFJ
You're not too late late. I can get the pcb files available if you want them. If you are in the US it will probably be cheaper to get them from me. I paid a bit extra to get them made in black. How many do you want?

There are still 6 boards available.

To answer your questions - I designed them myself on easyeda based on kite's design and then had them made on jlpcb. For 10 boards it was close to $40 to get them in black and with 30 day shipping.
Parkerrocker wrote:
Sat Oct 20, 2018 12:07 pm
I'm interested in a couple of the PCBs, but looks like I got here too late.
Where did you get those? Did you custom order them? Are you willing to share the design files?

It seems like with the button pad layout on the Start / Select buttons, the two contacts would work better than the v1.0b version he has made available on GitHub.

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Wed Oct 24, 2018 7:52 am
by gambino37
Sent another PM. I need more! These are great!

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Wed Oct 24, 2018 6:06 pm
by BlindArtificer
Still any available? I just need the pcb, I have a printer.

Re: Start/Select Style R1/R2/L1/L2 Back Buttons

Posted: Wed Oct 24, 2018 8:26 pm
by AntFJ
Sorry! All sold out.. I did add the Gerber file in the first post.

I added it to OSH Park as well though their board will be 1.6mm and my STL files are designed for a 1.0mm board.
https://oshpark.com/shared_projects/16e85xZU
edit: This could be easily solved by dropping the "top" STL down .6mm into the slicing program's buildplate... effectively cropping .6mm off of the part.
BlindArtificer wrote:
Wed Oct 24, 2018 6:06 pm
Still any available? I just need the pcb, I have a printer.