CSO Freezes when idle
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: CSO Freezes when idle
if that's the case, then you perhaps need a new board. I am assuming that you are either testing this outside a case or have already put some tape over the wifi module (as it gets a bit close to the back board), and if so then if you no longer see the issue we'll replace your board send me an email and we can go from there
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
-
- Posts: 104
- Joined: Tue Apr 25, 2017 2:59 pm
- Location: Michigan, USA
- Has thanked: 78 times
- Been thanked: 40 times
Re: CSO Freezes when idle
I am also experiencing this issue. Seems to happen when I transfer a large amount of data (games) over wifi to the roms folder. Not sure if this matters but they are psx games. It then freezes if I let it go into sleep mode and the screen dims. If I keep playing it while it downloads and it doesn't go into sleep mode, then no issues. If I shut it off it stays frozen until I push the mode button. When I turn it back on, everything returns to normal. It plays games fine and always returns to normal from sleep mode if I'm not downloading anything. Not a huge issue for me, just something to look into and be aware of.
-
- Posts: 38
- Joined: Sun Feb 04, 2018 11:13 am
- Has thanked: 15 times
- Been thanked: 5 times
Re: CSO Freezes when idle
Just wanna let Kite know that this happens to me as well when idle like transferring roms via SSH for example.
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: CSO Freezes when idle
When this happens does a USB keyboard allow any interaction?
If this has recently happened, please collect the messages log file https://github.com/kiteretro/Circuit-Sw ... e-log-file as I'm expecting to see some kind of kernel panic/dump.
If this has recently happened, please collect the messages log file https://github.com/kiteretro/Circuit-Sw ... e-log-file as I'm expecting to see some kind of kernel panic/dump.
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
-
- Posts: 38
- Joined: Sun Feb 04, 2018 11:13 am
- Has thanked: 15 times
- Been thanked: 5 times
Re: CSO Freezes when idle
Yes, I am transferring files over WinSCP. I don't have a USB keyboard, maybe the others would have an answer. Next time it happens I'll send you the log file. Thanks!kite wrote: ↑Wed Apr 04, 2018 1:52 amWhen this happens does a USB keyboard allow any interaction?
Transferring large files over as a share? Can you try using WinSCP instead?
If this has recently happened, please collect the messages log file https://github.com/kiteretro/Circuit-Sw ... e-log-file as I'm expecting to see some kind of kernel panic/dump.
Re: CSO Freezes when idle
Hi,
I just gave it a go - if you plug in a USB keyboard when it's frozen then it's unresponsive (alt-f4 did nothing).
You can, however, SSH into the unit if you ctrl-c the processing of .bashrc and the PI seems responsive to most commands with some exceptions.
The PI did detect the keyboard okay even in the odd state: /var/log/messages
I just gave it a go - if you plug in a USB keyboard when it's frozen then it's unresponsive (alt-f4 did nothing).
You can, however, SSH into the unit if you ctrl-c the processing of .bashrc and the PI seems responsive to most commands with some exceptions.
The PI did detect the keyboard okay even in the odd state: /var/log/messages
Code: Select all
Apr 8 20:23:29 retropie kernel: [ 983.736327] usb 1-1.4: Manufacturer: Dell
Apr 8 20:23:29 retropie kernel: [ 983.755329] input: Dell Dell USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2003.0002/input/input1
Apr 8 20:23:29 retropie kernel: [ 983.820663] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-3f980000.usb-1.4/input0
Code: Select all
root@retropie:~# lsusb
Bus 001 Device 005: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 001 Device 004: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
Bus 001 Device 003: ID 0d8c:0103 C-Media Electronics, Inc. CM102-A+/102S+ Audio Controller
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: CSO Freezes when idle
Pressing just "F4" (without alt) ?
What does this command return: vcgencmd measure_temp
Does it return in frozen state? It might be worth replacing your compute module. I think you've sent me an email, I haven't been through my mails yet so I'll reply there shortly
What does this command return: vcgencmd measure_temp
Does it return in frozen state? It might be worth replacing your compute module. I think you've sent me an email, I haven't been through my mails yet so I'll reply there shortly
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Re: CSO Freezes when idle
I tried just pressing F4 - nothing happened (actually tried all the keys).
I also tried killing all the ES processes, but the process hung and didn't seem to want to die.
I don't see this as an ES issue, as the hang is reproducible even if you terminate ES before the Pi gets into the state - you then just get a hung terminal prompt.
vcgencmd measure_temp hung.
I did email, yep. No rush
I also tried killing all the ES processes, but the process hung and didn't seem to want to die.
I don't see this as an ES issue, as the hang is reproducible even if you terminate ES before the Pi gets into the state - you then just get a hung terminal prompt.
vcgencmd measure_temp hung.
I did email, yep. No rush
Last edited by c_hri_s on Mon Apr 09, 2018 12:50 pm, edited 1 time in total.
Re: CSO Freezes when idle
I have seen this too, during long SFTP transfers but I am not sure if it's because of the wifi on the CSO cutting out or the device actually freezing. I don't think heat is a problem, so there's something going on. For the most part though, I am not seeing much freezing in regular gameplay. I should mention that I rarely have this on for more than 30 minutes at a time.
Who is online
Users browsing this forum: No registered users and 1 guest