Page 1 of 1
controls stop working when i screw the GB case shut
Posted: Mon Jul 16, 2018 7:23 am
by Maniac-Uk
work fine till I screw in the screws to close the case up cannot see any shorts or where it might be touching?
what area should I apply the tape just in case I am missing something
Re: controls stop working when i screw the GB case shut
Posted: Tue Jul 17, 2018 3:15 am
by Maniac-Uk
will take some images later but wifi mod defently coverd same with mode switch will put some tape on c connection.
see how that goes.
Re: controls stop working when i screw the GB case shut
Posted: Thu Jul 19, 2018 2:17 am
by Maniac-Uk
Fixed was the C USB connector doing it. the strange thing is now the wifi has stopped working now. just show think it G in wifi list. there is no router called G in my area just brought it in to the office to test it there and the same thing.
Re: controls stop working when i screw the GB case shut
Posted: Thu Jul 19, 2018 4:03 am
by Maniac-Uk
Ok, will go through the list might crack it open again as well see if that solves the issue.
just out of interest if I was to install a c USB ethernet cable would it work? as just looking for a way to dump a large collection of roms.
as USB method froze on me and now won't resume uploading roms.
Re: controls stop working when i screw the GB case shut
Posted: Mon Jul 23, 2018 7:03 am
by Maniac-Uk
ok sorry for the delay the joys of having a 9month old takes a lot of my time
Fixed it think I was having a blonde moment lack of sleep had switched off the wifi with mod switch all working just adding the few emulators for my set up and done thanks for the help.