sudomod

Does anyone have the procedures to calibrate the psp joystick the original way (you have to leave the microSD card ejected, then turn on the circuit sword...)?

thanks all

Hi,

Yeah I believe i left that in the code https://github.com/kiteretro/Circuit-Sw ... E.ino#L229

Hold START while POWERING ON the CS. Once switch is on, keep holding START for about 3-5 secs, and then rotate all the joysticks.. it'll calibrate for about 10 secs.. so if you do all that for like the first 15secs of it being powered on, it'll all work out!

thanks kite, that was it!

worked like a charm (like always)....