Circuit Sword can't power on

linuxgb
Posts: 24
Joined: Thu Jan 03, 2019 7:22 am
Been thanked: 1 time

Re: Circuit Sword can't power on

Post by linuxgb » Wed Nov 20, 2019 8:33 am

kite wrote:
Wed Nov 20, 2019 6:56 am
Sorry but that isn't possible, it needs special tools and the firmware is not available anywhere. It'll take a little time to ship and back, but like I said I will do this for free as it could well have been a mistake on my end and shouldn't have happened
oh
can i use usbasp to burn the firmware to the chip?
thx

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Circuit Sword can't power on

Post by kite » Wed Nov 20, 2019 8:56 am

It isn't possible, a HV programmer is needed (not AVRISP or USBASP) and also I don't plan to release the firmware file for it sorry :)
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

linuxgb
Posts: 24
Joined: Thu Jan 03, 2019 7:22 am
Been thanked: 1 time

Re: Circuit Sword can't power on

Post by linuxgb » Wed Nov 20, 2019 4:25 pm

kite wrote:
Wed Nov 20, 2019 8:56 am
It isn't possible, a HV programmer is needed (not AVRISP or USBASP) and also I don't plan to release the firmware file for it sorry :)
thx reply

the AVR HV programmer that i can buy on my local town, i only need the firmware to burn the chip,not need the open source,
so that will faster to repair the board
thx

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Circuit Sword can't power on

Post by kite » Thu Nov 21, 2019 2:08 am

I appreciate your enthusiasm but even the .hex I am not at this stage willing to make public or even private to individuals, I hope that you understand
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

linuxgb
Posts: 24
Joined: Thu Jan 03, 2019 7:22 am
Been thanked: 1 time

Re: Circuit Sword can't power on

Post by linuxgb » Thu Nov 21, 2019 6:43 am

kite wrote:
Thu Nov 21, 2019 2:08 am
I appreciate your enthusiasm but even the .hex I am not at this stage willing to make public or even private to individuals, I hope that you understand
thx reply
so that is bad new for me,so the board never use on mine,thx

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Circuit Sword can't power on

Post by kite » Fri Nov 22, 2019 1:51 am

The solution is to return it to an address that I will provide you once you send me an email, and I will repair and ship it back to you tracked, all for free!

My terms are that you should test the product within 30 days of it arriving to you, if there is fault then i would even pay for the return shipping! However for you it has been over 30 days so you will need to send it to me, and I will then do the rest for free. The total turnaround time is between 2-6 weeks depending on the postage used to send to me. I hope that makes it clear
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest