Cant upload to Aio v2.2

Post Reply
User avatar
BazzJay
Posts: 7
Joined: Wed Mar 15, 2017 5:32 am
Location: Perth, WA
Has thanked: 5 times
Been thanked: 1 time
Contact:

Cant upload to Aio v2.2

Post by BazzJay » Thu Jan 25, 2018 10:56 pm

So After I managed to find how to program the board it now wont program.
The chip has come up as an Arduino Leonardo so I've selected it for both the board and com port.
After entering bootloader and it starts uploading it sits there and then says that the programmer is not responding and the programmer did not respond to command exit bootloader.
Should I be using a particular programmer?
Any ideas on how I can get the upload to complete would be much appreciated!

avrdude: butterfly_recv(): programmer is not responding
avrdude: error: programmer did not respond to command: exit bootloader

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2391
Joined: Thu May 05, 2016 8:33 am
Location: Fall River, MA
Has thanked: 1265 times
Been thanked: 2906 times

Re: Cant upload to Aio v2.2

Post by Helder » Fri Jan 26, 2018 6:10 am

Use usbasp programmer as I have shown in the guide in the Guides subforum. It should show up as an Atmega32u4 not a Leonardo which is what it shows if you use the Arduino IDE which there is a guide in the same subforum.
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

User avatar
endergx
Posts: 30
Joined: Tue Dec 19, 2017 12:00 pm
Location: Los Angeles, CA
Has thanked: 4 times
Been thanked: 8 times

Re: Cant upload to Aio v2.2

Post by endergx » Thu Feb 08, 2018 12:17 am

i bought one of the retro gaming now boards and the controls (and USB port) aren’t recognized by emu station. wiring is good, reinstalled retropie image, still nothing. do i need to program the board with my usbasp?

User avatar
VeteranGamer
Posts: 1407
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 411 times
Been thanked: 756 times

Re: Cant upload to Aio v2.2

Post by VeteranGamer » Thu Feb 08, 2018 3:03 am

endergx wrote:
Thu Feb 08, 2018 12:17 am
i bought one of the retro gaming now boards and the controls (and USB port) aren’t recognized by emu station. wiring is good, reinstalled retropie image, still nothing. do i need to program the board with my usbasp?
can you show how you've wired it up....

if you just wired the USB data wires (white D- & green D+)
and are not also supplying any power to the board, then it wont be recognized....

its best to show what you've actually done....

.

User avatar
endergx
Posts: 30
Joined: Tue Dec 19, 2017 12:00 pm
Location: Los Angeles, CA
Has thanked: 4 times
Been thanked: 8 times

Re: Cant upload to Aio v2.2

Post by endergx » Thu Feb 08, 2018 10:14 am

hey veteran, here's a couple photos. everything is wired exactly like the diagram shows. let me know if i'm missing something obvious.
IMG_1135.jpg
IMG_1135.jpg (665.76 KiB) Viewed 1986 times
IMG_1134.jpg
IMG_1134.jpg (602.7 KiB) Viewed 1986 times

User avatar
VeteranGamer
Posts: 1407
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 411 times
Been thanked: 756 times

Re: Cant upload to Aio v2.2

Post by VeteranGamer » Thu Feb 08, 2018 1:36 pm

endergx wrote:
Thu Feb 08, 2018 10:14 am
hey veteran, here's a couple photos. everything is wired exactly like the diagram shows. let me know if i'm missing something obvious.
you wiring doesnt look that bad (actually looks pretty decent)....

also the board doesnt need programming, it should work as is.....



i would recommend to have the wiring of the data leads twisted like this (it might help)....

Image


also i personally dont think/feel that heavy gauge wires are really needed for the data connections, especially if you intend to twist them....
you can strip a decent USB cable and used the wires from that (and they should normally be easier to twist, and stay twisted)....


did you actually test everything (especially the AIO) before you started to glue everything in....




also this is something that Helder can anwser.....
the Hub chip looks like its been modified/replaced (not 100% certain on this).....
maybe a reflow of the hub chip might be needed (again, id get confirmation from Helder on this)




but try the twisted data wires first, that might help......


.

User avatar
endergx
Posts: 30
Joined: Tue Dec 19, 2017 12:00 pm
Location: Los Angeles, CA
Has thanked: 4 times
Been thanked: 8 times

Re: Cant upload to Aio v2.2

Post by endergx » Thu Feb 08, 2018 1:53 pm

thanks i’ll give that a shot.

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2391
Joined: Thu May 05, 2016 8:33 am
Location: Fall River, MA
Has thanked: 1265 times
Been thanked: 2906 times

Re: Cant upload to Aio v2.2

Post by Helder » Fri Feb 09, 2018 3:56 am

I know it's my board but since I'm not selling any at this time but RetroGamingNow sells them he is the one to contact with any issues.


Have you tried hooking this up to a PC to see if it's recognized? The usb is supposed to have that little board and bridged pins in order to work properly so don't mess with that.
My Sale Threads:

Retro PSU, 3.5A output!


Chat with me and other members


Don't contact me about obtaining my board files (as you will not get them). Don't contact me about any of my boards if they are sold out, they will be restocked as soon as I can get them.


Don't support thieves like ckliang who copied my AIO to resell and is now cloning the mintyPi, support the original creators and not the thieves!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests