[SOLVED] No Sound from MintyPi

Resolved mintyPi issues go here. Search this section first before creating a new support thread!
SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

[SOLVED] No Sound from MintyPi

Post by SmiddyJR » Fri Dec 22, 2017 6:59 am

Hey,

Im having an issue and wanted to know if anyone has and idea what could be wrong.
Just finished my first mintyPi (will be posting to show off corner when finished :) ) and I seem to be having issue with the sound.

I have checked the wires using a multimeter, i had an issue that the green and white data cables on the pi were bridged, I have cleaned this and re-soldered them.

I am still getting no sound in menus or in games. How would i prove the speaker works?
And i forgot to test my USB DAC before removing the jack soldered to it. I have spares but wanted to rule out everything before dismantling and replacing.

Also how can i verify that the rasperrypi is seeing my USB audio DAC?

Any help is much appreciated!
Last edited by SmiddyJR on Wed Jan 03, 2018 7:36 am, edited 1 time in total.

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: No Sound from MintyPi

Post by rodocop » Fri Dec 22, 2017 7:11 am

I think you can type lsusb into the terminal and it should show the connected usb devices. If you have a pare speaker you can wire it up and see, just to rule out the speaker. But it is likely a wiring issue.

Post some close up pics of the wiring, maybe someone can spot an issue.

SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

Re: No Sound from MintyPi

Post by SmiddyJR » Fri Dec 22, 2017 7:25 am

Here are the photos attached. Not great focus when zoomed in, but my soldering definitely looked better from further away.
Attachments
20171222_141752.jpg
20171222_141752.jpg (1.41 MiB) Viewed 10708 times
20171222_141726.jpg
20171222_141726.jpg (1.04 MiB) Viewed 10708 times
20171222_141709.jpg
20171222_141709.jpg (544.5 KiB) Viewed 10708 times
20171222_141629.jpg
20171222_141629.jpg (642.61 KiB) Viewed 10708 times
20171222_141601.jpg
20171222_141601.jpg (1.2 MiB) Viewed 10708 times

SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

Re: No Sound from MintyPi

Post by SmiddyJR » Fri Dec 22, 2017 7:35 am

I just connected in via putty and got this response

Bus 001 Device 002: ID 08bb:2704 Texas Instruments Audio Codec
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: No Sound from MintyPi

Post by rodocop » Fri Dec 22, 2017 8:40 am

Still looks like you have a bridge between the white and green wires on the pi. You said you cleaned that up. Was the photo before or after that? I'm not sure what the name of the sound card will be so that lsusb TI audio codec might be the one. I don't have my minty pi at the moment to confirm.

SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

Re: No Sound from MintyPi

Post by SmiddyJR » Fri Dec 22, 2017 9:08 am

Yeah ive snipped the wires back and redid the green and white solders again, new photo attached.

Interestingly a USB DAC spare plugged in works fine with headphones.
Tried soldering a new speaker but no luck, going to get the card out of the tin to make it easier.
So far all continuity tests and wires seem fine, still no sound though
Attachments
20171222_160436.jpg
20171222_160436.jpg (88.2 KiB) Viewed 10699 times

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: No Sound from MintyPi

Post by rodocop » Fri Dec 22, 2017 9:23 am

Also, be careful of that white wire. Make sure no solder is bridged with the small hole directly beside it, hard to see if there is a bridge in the photo.

SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

Re: No Sound from MintyPi

Post by SmiddyJR » Sat Dec 23, 2017 3:52 am

Hey,
Checked definitely not bridged there. Tried a fresh SD card just incase i messed with any settings.
To rule out the DAC i used a good DAC that worked with headphones and wired up a speaker still no sound on PC or Raspberry Pi now. Got new USB wire and rewired to a 3rd speaker. Cant see what im doing wrong. It looks like on the updated parts video Wermy bridged different pads on the DAC. Is mine correct??
Attachments
20171223_104918.jpg
20171223_104918.jpg (1.36 MiB) Viewed 10686 times
20171223_104910.jpg
20171223_104910.jpg (1.25 MiB) Viewed 10686 times
20171223_104900.jpg
20171223_104900.jpg (1.16 MiB) Viewed 10686 times
20171223_104855.jpg
20171223_104855.jpg (1.09 MiB) Viewed 10686 times
20171223_104845.jpg
20171223_104845.jpg (1 MiB) Viewed 10686 times

SmiddyJR
Posts: 19
Joined: Fri Oct 21, 2016 8:52 am
Been thanked: 3 times

Re: No Sound from MintyPi

Post by SmiddyJR » Sat Dec 23, 2017 4:02 am

I also found this command which looks like the raspberry pi is seeing my DAC, how would i find out if my speaker works without wiring it to the DAC ?

aplay -l
Subdevice #0: subdevice #0
card 1: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: No Sound from MintyPi

Post by rodocop » Sat Dec 23, 2017 10:26 pm

Wiring seems okay. But it still looks like the white wire is making contact with the ground hole on the pcb (directly beside it).

Post Reply

Who is online

Users browsing this forum: Google Adsense [Bot] and 1 guest