Page 2 of 2

Re: SLA printing services

Posted: Wed Sep 20, 2017 3:09 am
by Dukana
moooarcuuuus wrote: ā†‘
Tue Sep 19, 2017 11:24 pm
Can you say what the price?
Sure. $30 for the print, $15 for shipping. Keep in mind, this is for the faceplate only.

Re: SLA printing services

Posted: Wed Sep 20, 2017 3:41 am
by abrugsch
was that from shapeways or a 3D hubs provider?

Re: SLA printing services

Posted: Wed Sep 20, 2017 12:20 pm
by Dukana
3D Hubs.
New faceplate installedShow
New faceplate installed.jpg
New faceplate installed.jpg (1.6 MiB) Viewed 3638 times
Yes, it was very expensive to print. But you know what? The button action works perfectly, no sanding required.

I might go with another SLS printed faceplate for my next build. I'm very happy with how it turned out.

Re: SLA printing services

Posted: Wed Sep 20, 2017 5:58 pm
by ICMF
FYI, Shapeways is substantially cheaper - just the faceplate in white is about $8, and the whole set of parts would be about $35 - less if you sprue them together, more if you want polished/dyed. Though you'd really only need the faceplate, bezel and possibly the hinge parts, which would be about $15

Re: SLA printing services

Posted: Fri Sep 22, 2017 5:35 am
by peeweejedi
I can do some 3d printing.

Re: SLA printing services

Posted: Mon Dec 18, 2017 11:14 pm
by katei456
Hello...

I want some 3D printing services but I am confused from where I can take this services...
So, please suggest me some printing service company name or some shops from I can take this services easily...???

Re: SLA printing services

Posted: Mon Dec 18, 2017 11:15 pm
by YaYa
katei456 wrote: ā†‘
Mon Dec 18, 2017 11:14 pm
Hello...

I want some 3D printing services but I am confused from where I can take this services...
So, please suggest me some printing service company name or some shops from I can take this services easily...???
You can browse 3dhubs.com, iā€™m sure you will find a hub near your place !

Re: SLA printing services

Posted: Tue Dec 19, 2017 6:28 pm
by ICMF
Simple: Shapeways, i.materialise, Sculpteo. Upload your files, pick the material/resolution you want, then wait. You'll pay a premium for the convenience though.

More complicated - 3DHubs. Upload your models, sort through local printers to find the material/resolution you want - you'll probably need to add filters for materials or specific printers too - wait for them to print your model, then go pick up the parts. It will be cheaper with more options, but it's a bit complicated if you don't know what you're looking for... or if you DO know what you're looking for, but don't know how to find it.