I don't know what this is called or what the source of the problem is, but when I print in abs the last couple of layers are not printing right. I would see holes or gabs in the last couple of layers.
Also attached is my ABS profile from octopriint
Top layers not printing right
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: Top layers not printing right
Looks like underextrusion and not enough cooling but i may be wrong. I am new to 3D printing so take what i say with gloves
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: Top layers not printing right
What are you using to slice your model? You may just need to add a few more solid top layers.
Re: Top layers not printing right
I am using the slicer built into octopi.
http://docs.octoprint.org/en/master/bun ... /cura.html
I looked through the slicer profiles and don't see anything for top/bottom layers counts
http://docs.octoprint.org/en/master/bun ... /cura.html
I looked through the slicer profiles and don't see anything for top/bottom layers counts
- wermy
- Site Admin
- Posts: 1346
- Joined: Tue May 03, 2016 8:51 pm
- Has thanked: 620 times
- Been thanked: 1322 times
- Contact:
Re: Top layers not printing right
You may want to download the desktop version of cura and try slicing with that (octoprint uses the cura engine for slicing but you don't have nearly as much control over it). You'll be able to tweak all kinds of things, including how many top solid layers there are.
Re: Top layers not printing right
I thinking the slicer is missing some options. A while back I had to go into the text editor to make adjustments to the profiles for supports.
Luckly for me there is an octoprint plugin I can use.
Luckly for me there is an octoprint plugin I can use.
Re: Top layers not printing right
I am liking this slicer, real nice. The thing is I am still in the testing phase. I finally got the new setup tuned so that cura is working with my duplicator properly (last issue was the diamater).
Initially I avoided it because I thought it would only work on ultramaker machines
Initially I avoided it because I thought it would only work on ultramaker machines
Who is online
Users browsing this forum: No registered users and 1 guest