yes that's nice idea, but in this case would be maybe better to design some kind of locking mechanism to the parts. Meanwhile I got another idea, we need to cut to side of the case, what about cutting the top part too? in that case I could clip the bracket to case and have possibly glueless bracket :moooarcuuuus wrote: ↑Fri Oct 20, 2017 3:09 amI understand your way, and its ok. You dont have to do it. Your bracket is great as it is....
Just think over it. The holder is ideal for modularity. Just one example, a lot of thinking is still needed, how and at all: One base part (in two individual parts, frame and holes) and different attachments. Once with two buttons, two buttons and a joystick, two buttons and a trackball, two buttons in nonsquare... etc.
640x480 Bracket for Kite's SAIO Board
Re: 640x480 Bracket for Kite's SAIO Board
-
- Posts: 104
- Joined: Tue Apr 25, 2017 2:59 pm
- Location: Michigan, USA
- Has thanked: 78 times
- Been thanked: 40 times
Re: 640x480 Bracket for Kite's SAIO Board
A glueless bracket is the "holy grail!"kubino wrote: ↑Fri Oct 20, 2017 3:45 amyes that's nice idea, but in this case would be maybe better to design some kind of locking mechanism to the parts. Meanwhile I got another idea, we need to cut to side of the case, what about cutting the top part too? in that case I could clip the bracket to case and have possibly glueless bracket :moooarcuuuus wrote: ↑Fri Oct 20, 2017 3:09 amI understand your way, and its ok. You dont have to do it. Your bracket is great as it is....
Just think over it. The holder is ideal for modularity. Just one example, a lot of thinking is still needed, how and at all: One base part (in two individual parts, frame and holes) and different attachments. Once with two buttons, two buttons and a joystick, two buttons and a trackball, two buttons in nonsquare... etc.
640bracket_clip.png
- moooarcuuuus
- Posts: 232
- Joined: Tue Jul 04, 2017 1:28 am
- Has thanked: 2 times
- Been thanked: 94 times
Re: 640x480 Bracket for Kite's SAIO Board
smoothoperator wrote: ↑Fri Oct 20, 2017 1:48 amA PSP1000 joystick model would be sweet!moooarcuuuus wrote: ↑Fri Oct 20, 2017 1:02 amThank you. Very good! Maybe you make a version with a PSP joystick between dpad and ABXY buttons.
You can split the model in usefull parts for printing without support. The parts can be glued.
Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep, Eat, Sleep... Game Over
-
- Posts: 104
- Joined: Tue Apr 25, 2017 2:59 pm
- Location: Michigan, USA
- Has thanked: 78 times
- Been thanked: 40 times
Re: 640x480 Bracket for Kite's SAIO Board
Will this bracket work without any modification to the screen? I realize that part of the screen would be covered, and kite is working on a solution for that, but does the case still need shaving or the edge of the screen cut up? Also could it be possible to talk to HoolyHoo about printing these and selling them to us to make it easier for guys like me to acquire one? He does a great job printing and can even include the brass inserts!kubino wrote: ↑Fri Oct 20, 2017 3:45 amyes that's nice idea, but in this case would be maybe better to design some kind of locking mechanism to the parts. Meanwhile I got another idea, we need to cut to side of the case, what about cutting the top part too? in that case I could clip the bracket to case and have possibly glueless bracket :moooarcuuuus wrote: ↑Fri Oct 20, 2017 3:09 amI understand your way, and its ok. You dont have to do it. Your bracket is great as it is....
Just think over it. The holder is ideal for modularity. Just one example, a lot of thinking is still needed, how and at all: One base part (in two individual parts, frame and holes) and different attachments. Once with two buttons, two buttons and a joystick, two buttons and a trackball, two buttons in nonsquare... etc.
640bracket_clip.png
- markolomew
- Posts: 60
- Joined: Wed Aug 23, 2017 1:31 pm
- Location: Houston, Texas
- Has thanked: 38 times
- Been thanked: 37 times
Re: 640x480 Bracket for Kite's SAIO Board
I just spoke with hoolyhoo and he's going to take a look at it to see what he can do for us. He told me to give him a few days. So there's that to look forward to!smoothoperator wrote: ↑Wed Oct 25, 2017 7:43 pmAlso could it be possible to talk to HoolyHoo about printing these and selling them to us to make it easier for guys like me to acquire one? He does a great job printing and can even include the brass inserts!
Check out my builds: Click Here
Free .STL files for 3DS/PSP joystick cap mashup: Click Here
Check out my store, 8bitmark.com: Click Here
Free .STL files for 3DS/PSP joystick cap mashup: Click Here
Check out my store, 8bitmark.com: Click Here
Re: 640x480 Bracket for Kite's SAIO Board
I have no problem if anybody is going to print the STL for you. I can do that too in case of need, but the case still need modification (cut on the side).smoothoperator wrote: ↑Wed Oct 25, 2017 7:43 pmWill this bracket work without any modification to the screen? I realize that part of the screen would be covered, and kite is working on a solution for that, but does the case still need shaving or the edge of the screen cut up? Also could it be possible to talk to HoolyHoo about printing these and selling them to us to make it easier for guys like me to acquire one? He does a great job printing and can even include the brass inserts!
But note I'll release new version of bracket soon so I suggest waiting a little bit. There is need another minor opening to have better fit with Kite's AIO.
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: 640x480 Bracket for Kite's SAIO Board
Any more on this kubino? Is there another version of this bracket or is this the final iteration? Thanks for your hard work!
Re: 640x480 Bracket for Kite's SAIO Board
Sorry hadn't much time to work on this yet. But it's definitively on my todo list!gilbertotron wrote: ↑Sun Jan 14, 2018 2:04 pmAny more on this kubino? Is there another version of this bracket or is this the final iteration? Thanks for your hard work!
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: 640x480 Bracket for Kite's SAIO Board
No worries mate, I'm definitely not putting pressure on dude. Thanks for the drawing. I'm going to PM you now about getting a case for my next build. Cheer's.
Re: 640x480 Bracket for Kite's SAIO Board
I have downloaded the model buts its empty. Can you please check?moooarcuuuus wrote: ↑Mon Oct 23, 2017 10:55 pmPSP-Joystick.stpsmoothoperator wrote: ↑Fri Oct 20, 2017 1:48 amA PSP1000 joystick model would be sweet!moooarcuuuus wrote: ↑Fri Oct 20, 2017 1:02 amThank you. Very good! Maybe you make a version with a PSP joystick between dpad and ABXY buttons.
You can split the model in usefull parts for printing without support. The parts can be glued.
Who is online
Users browsing this forum: No registered users and 1 guest