GBZ (and DMG-01) display stand

Share your STL files, CAD design files, etc. here!
Post Reply
User avatar
wermy
Site Admin
Posts: 1346
Joined: Tue May 03, 2016 8:51 pm
Has thanked: 620 times
Been thanked: 1322 times
Contact:

GBZ (and DMG-01) display stand

Post by wermy » Tue Jan 09, 2018 9:23 pm

Finally got the STL files for my DMG/GBZ stand up on Thingiverse (also, I'm on Thingiverse now!):
https://www.thingiverse.com/thing:2752073
Sale thread is here:
https://sudomod.com/forum/viewforum.php?f=38
25007699_1883537908643381_8814340517182570496_n.jpg
25007699_1883537908643381_8814340517182570496_n.jpg (1.06 MiB) Viewed 5784 times
26224381_1698777366852657_7157701451349753856_n.jpg
26224381_1698777366852657_7157701451349753856_n.jpg (825.46 KiB) Viewed 5784 times
ImageImageImageImage

User avatar
BadBert
Posts: 377
Joined: Wed Jun 29, 2016 4:14 am
Location: Hoogerheide, Netherlands
Has thanked: 100 times
Been thanked: 61 times
Contact:

Re: GBZ (and DMG-01) display stand

Post by BadBert » Wed Jan 10, 2018 1:09 am

awsome wermy!!!! I'll be printing one for my gbz :D
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!

Dukana
Posts: 80
Joined: Wed Sep 07, 2016 11:45 am
Has thanked: 51 times
Been thanked: 29 times

Re: GBZ (and DMG-01) display stand

Post by Dukana » Wed Jan 17, 2018 2:42 am

That's so awesome! I was wondering if a slight modification might be made... a notch in the center, to accommodate a headphone plug. For practical applications. I'd like to keep something like this at work in my locker, then use the GBZ in a stand so I can watch kodi on lunch breaks without holding it or laying it flat on the table, or worse, annoying my coworkers with whatever I'm watching / listening to.

McGyver
Posts: 226
Joined: Tue Jan 31, 2017 11:06 am
Location: Tianjin / China
Has thanked: 25 times
Been thanked: 53 times

Re: GBZ (and DMG-01) display stand

Post by McGyver » Wed Feb 21, 2018 6:59 am

Thank you Wermy for this amazing design. I printed it in PLA wood and learned how annoying this material can be! It was HULK like sticking to the bed. (Anycubic heated Ultrabase). I destroyed 3 printed versions during removal from the cooled bed. Anyway: I saw this as experience in learning using wood material by adjusting thermal and extruding settings. Next time I will try some adaptations to the print bad. Maybe cover by Capton tape...

Anyway a really nice design and wonderful together with the gameboy on it.

User avatar
wermy
Site Admin
Posts: 1346
Joined: Tue May 03, 2016 8:51 pm
Has thanked: 620 times
Been thanked: 1322 times
Contact:

Re: GBZ (and DMG-01) display stand

Post by wermy » Wed Feb 21, 2018 7:55 am

McGyver wrote:
Wed Feb 21, 2018 6:59 am
Thank you Wermy for this amazing design. I printed it in PLA wood and learned how annoying this material can be! It was HULK like sticking to the bed. (Anycubic heated Ultrabase). I destroyed 3 printed versions during removal from the cooled bed. Anyway: I saw this as experience in learning using wood material by adjusting thermal and extruding settings. Next time I will try some adaptations to the print bad. Maybe cover by Capton tape...

Anyway a really nice design and wonderful together with the gameboy on it.
Thanks, glad you like it. :) That's surprising, woodfill doesn't tend to stick overly-well when I use it (I print on PEI). Some glue stick would likely still let it stick well enough but allow it to release easier once it cools.
ImageImageImageImage

User avatar
sixteenbit
Posts: 54
Joined: Mon Aug 21, 2017 8:42 pm
Has thanked: 18 times
Been thanked: 13 times
Contact:

Re: GBZ (and DMG-01) display stand

Post by sixteenbit » Sun Feb 25, 2018 5:12 pm

If you let the bed cool with the ultrabase you can use 1 finger to move it off the base.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest