Page 1 of 3
L1,2/R1,2 bracket for CSO Button Board
Posted: Thu Mar 01, 2018 3:09 pm
by kubino
Another design by me. This time for Kite's CSO universal Button Board.
- kite_backboard_4x.png (352.38 KiB) Viewed 18563 times
You need to solder 6x6x8 tactile buttons:
- P_20180301_175241.jpg (1.2 MiB) Viewed 18563 times
And drill 4 holes to back of the case. Holes in bracket should match desired location for back case so you can use it as drill template (untested, I drill holes by CNC
). Tactile buttons caps were used, just search A101 on Aliexpress maybe you can find them on eBay too.
- STLs.png (31.13 KiB) Viewed 18563 times
- P_20180301_175216.jpg (2.17 MiB) Viewed 18563 times
- P_20180301_223602.jpg (1.27 MiB) Viewed 18563 times
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Thu Mar 01, 2018 3:41 pm
by kite
Great! Do you have a link to those caps? "A101" on ali didn't show anything
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Thu Mar 01, 2018 3:48 pm
by kubino
kite wrote: ↑Thu Mar 01, 2018 3:41 pm
Great! Do you have a link to those caps? "A101" on ali didn't show anything
Sure. Here you go
https://www.aliexpress.com/item/50PCS-r ... 0.0.zufOrC
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Fri Mar 02, 2018 3:29 pm
by EriolGaurhoth
Kubino, you are awesome! Thanks for sharing these files, these are the missing pieces for my build
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Wed Mar 07, 2018 8:34 am
by mrdude42
I wonder if these caps and switches from Amazon would work:
http://amzn.to/2oQqxmC
I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Wed Mar 07, 2018 8:44 am
by kubino
mrdude42 wrote: ↑Wed Mar 07, 2018 8:34 am
I wonder if these caps and switches from Amazon would work:
http://amzn.to/2oQqxmC
I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.
It should work fine, but not a big fan of this solution. These caps hase no counter part which "holds" in case. You might have issue with not sticking caps in future.
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Thu Mar 08, 2018 2:33 pm
by mrdude42
kubino wrote: ↑Wed Mar 07, 2018 8:44 am
mrdude42 wrote: ↑Wed Mar 07, 2018 8:34 am
I wonder if these caps and switches from Amazon would work:
http://amzn.to/2oQqxmC
I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.
It should work fine, but not a big fan of this solution. These caps hase no counter part which "holds" in case. You might have issue with not sticking caps in future.
Ahhhh. Good point. The search for the perfect buttons continues... I wonder if it would work if I tried using glue to keep the button on the switches?
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Tue Mar 13, 2018 12:25 pm
by umbynos95
Hello guys! It's possible to use silicone dip switch (8*8*5mm) like these with this bracket?
http://s.aliexpress.com/VrYzI3iQ?fromSns=Copy
Maybe with 3d printed caps? What do you think?
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Tue Mar 13, 2018 1:51 pm
by kite
Yes!
Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else
Re: L1,2/R1,2 bracket for CSO Button Board
Posted: Tue Mar 13, 2018 2:00 pm
by umbynos95
kite wrote: ↑Tue Mar 13, 2018 1:51 pm
Yes!
Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else
Oh..
I have the one coming with preorder #4.. So it's not possible?