L/R holder and button caps for soft tactile for Circuit Gem
Posted: Mon Mar 18, 2019 9:28 am
This was my solution for the L and R on my Gem. Everything Fit snug (but not tight). I used 8mm x 8mm soft tactile switches.
- 751A7615-0C30-4791-ABF0-54F93120BE5A.jpeg (1.65 MiB) Viewed 5078 times
- C0813BDB-8A3D-47F2-8976-41B648B199A6.jpeg (2.19 MiB) Viewed 5078 times
- 94CF0F95-6F80-4ECD-9FA2-14D55AB7A235.jpeg (2.56 MiB) Viewed 5078 times