Ant's Pocket FE Files
Posted: Thu Apr 04, 2019 2:28 pm
UPDATE: 7 May - added in back buttons, cart, and back board files
Hey folks - I will be making a full set of 3d printed parts for the galaxy gaming pocket FE. I wanted to get these out to those of you making your own kits ASAP as the supplied STL files from GG just weren't doing it for me.
All of these files fit snugly with my printer/settings. Please let me know if you guys need more clearances set for your machines (or you could just scale up/down the parts as required).
I will be adding more parts as I go... back buttons, cartridge, etc.
Front Buttons (does not need to be glued in):
Shoulder Button Drill Guides:
Shoulder Button Bracket:
Cart:
BOARD GERBERs - THESE NEED TO BE 1mm. Recommend buying them from JLPCB or other manufacturer... OSH park only makes 1.6mm boards:
Hey folks - I will be making a full set of 3d printed parts for the galaxy gaming pocket FE. I wanted to get these out to those of you making your own kits ASAP as the supplied STL files from GG just weren't doing it for me.
All of these files fit snugly with my printer/settings. Please let me know if you guys need more clearances set for your machines (or you could just scale up/down the parts as required).
I will be adding more parts as I go... back buttons, cartridge, etc.
Front Buttons (does not need to be glued in):
Shoulder Button Drill Guides:
Shoulder Button Bracket:
Cart:
BOARD GERBERs - THESE NEED TO BE 1mm. Recommend buying them from JLPCB or other manufacturer... OSH park only makes 1.6mm boards: