Failed test - SHDN “ON” and LCD test

Get help with your VMµ build here!
Post Reply
Alienxdroid
Posts: 3
Joined: Sat Nov 27, 2021 7:11 am

Failed test - SHDN “ON” and LCD test

Post by Alienxdroid » Mon Feb 14, 2022 5:28 pm

I’ve put together my Gem and have gotten to the point where the test loops the SHDN on and LCD Test forever.
I’ve tested the SHDN Gpio for continuity and it doesn’t look to have shorted to ground or any other pin around it. what’s the next step? Shouldn’t SHDN be set to off and when I turn the pwr switch to off it should have turned off, it didn’t it brought the menu up.
0906CD77-8536-4149-B20D-E2164C932A9B.jpeg
0906CD77-8536-4149-B20D-E2164C932A9B.jpeg (2.79 MiB) Viewed 67841 times
C404AF93-B304-4CA9-A1B7-7FB170A54829.jpeg
C404AF93-B304-4CA9-A1B7-7FB170A54829.jpeg (2.52 MiB) Viewed 67841 times
81176D5A-298A-4ED7-A39D-DC99BC32AABB.jpeg
81176D5A-298A-4ED7-A39D-DC99BC32AABB.jpeg (2.89 MiB) Viewed 67841 times
Oh I’ve also tried to boot it for 10 min in normal mode and it won’t. The pboot is green.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest