LumiNES - (Cool Baby/Hex NESemu ESP32 Board) w/ Environment Adjustable Backlight

Post your in-progress project logs for the summer 2018 competition here!
Post Reply
User avatar
Posts: 20
Joined: Tue Feb 20, 2018 4:54 pm
Has thanked: 10 times
Been thanked: 17 times

LumiNES - (Cool Baby/Hex NESemu ESP32 Board) w/ Environment Adjustable Backlight

Post by nobble » Fri Aug 31, 2018 10:56 pm

Hey Sudomod!

It's been a bit since I last posted on the forums...Futureboy has had his time. ON TO NEW MODS!

Last minute I decided to try and enter the Summer Competition (or rather dared to by Wermy).
This project is a collaboration with my good friend Modsiah aka Postman.

The build uses a Cool Baby (BittBoy knockoff) casing, Hex's ESP32 NESemu board and a photo resistor to adjust lcd brightness.

  • ESP32
  • Cool Baby
  • Hex Board
  • ili9341 2.2" SPI Lcd
  • Stereo Audio Amp
  • Photo Resistor
Unfortunately during compiling of the code we ran into some issues and will not have the project done in time for the deadline.
The entire week leading up to the end date, we had stayed up long nights learning so much about the ESP32 and different coding environments. I really appreciate all the help and support along the way from everyone! (You know who you are!) :)

I am going to continue to figure out a solution and post my progress when done. I always post project updates first on my IG.
IMG_20180728_223810_078.jpg (1.43 MiB) Viewed 5821 times
IMG_20180821_224526_179.jpg (76.18 KiB) Viewed 5820 times
IMG_20180821_224526_177.jpg (79.37 KiB) Viewed 5820 times
IMG_20180729_030117_104.jpg (2.53 MiB) Viewed 5820 times
IMG_20180831_190240_545.jpg (57.51 KiB) Viewed 5820 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest