Rob's Gameboy Zero [FINISHED]
-
- Posts: 36
- Joined: Mon Jul 04, 2016 3:47 am
- Location: Amersfoort, The Netherlands
- Has thanked: 7 times
- Been thanked: 9 times
Re: Rob's Gameboy Zero [Screen troubles]
Just tested the screen with the PowerBoost as power source and it works!
Now I have all the needed parts I can finally start with the assembly.
Now I have all the needed parts I can finally start with the assembly.
My Gameboy zero project: http://www.sudomod.com/forum/viewtopic.php?f=9&t=887
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: Rob's Gameboy Zero [Screen works!]
Cool rob!!
Happy building :p
Happy building :p
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 36
- Joined: Mon Jul 04, 2016 3:47 am
- Location: Amersfoort, The Netherlands
- Has thanked: 7 times
- Been thanked: 9 times
Re: Rob's Gameboy Zero [Start building]
All the major parts are delivered. Yesterday I started with the screen assembly. See the topic start for pics.
My Gameboy zero project: http://www.sudomod.com/forum/viewtopic.php?f=9&t=887
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: Rob's Gameboy Zero [Start building]
Cool rob
hope the 3d printed parts hold up but i think you'll be fine
Just tighten the screws with care
hope the 3d printed parts hold up but i think you'll be fine
Just tighten the screws with care
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 23
- Joined: Sat Jun 25, 2016 4:27 am
- Has thanked: 2 times
-
- Posts: 36
- Joined: Mon Jul 04, 2016 3:47 am
- Location: Amersfoort, The Netherlands
- Has thanked: 7 times
- Been thanked: 9 times
Re: Rob's Gameboy Zero [Start building]
I've almost finished my GB Zero build but have a strange issue. Before I assemble the GB I powered it up for a final test. But now the Pi's act led is flickering. At the same time the speaker is making noise. Is there somebody who can point me to the right direction?
Here's a video where I power on the GBZ; https://youtu.be/Zqu_xV6Cq58
Here's a video where I power on the GBZ; https://youtu.be/Zqu_xV6Cq58
My Gameboy zero project: http://www.sudomod.com/forum/viewtopic.php?f=9&t=887
- alien0matic
- Posts: 102
- Joined: Wed Jun 08, 2016 7:20 am
- Has thanked: 15 times
- Been thanked: 23 times
Re: Rob's Gameboy Zero [Problems... ]
Try putting the audio cables somewhere else. If that doesn't work try shielding it.
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: Rob's Gameboy Zero [Problems... ]
I would shield the wires rob, sounds like classic distortion noises.
How are the 3d printed parts holding up?
I hope to start my build soon, done some minor stuff
How are the 3d printed parts holding up?
I hope to start my build soon, done some minor stuff
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 36
- Joined: Mon Jul 04, 2016 3:47 am
- Location: Amersfoort, The Netherlands
- Has thanked: 7 times
- Been thanked: 9 times
Re: Rob's Gameboy Zero [Problems... ]
What can I use to shield the wires? I can't reroute them...alien0matic wrote:Try putting the audio cables somewhere else. If that doesn't work try shielding it.
My Gameboy zero project: http://www.sudomod.com/forum/viewtopic.php?f=9&t=887
Who is online
Users browsing this forum: No registered users and 1 guest