The wiring is hard to see like that...
as mentioned, make a power strip.
so go from power boost to power strip, and from powerstrip to Pi0, from powerstrip to USB HUB, and from powerstrip to your screen.
Try that, and if that does not work, post back here again (with photo )
I had mine tested with a power strip, but only with the screen and Pi0, i did not hook up the USB hub yet...
Alternative power supply help
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: Alternative power supply help
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
Re: Alternative power supply help
Thanks BadBert and Psy128 for your reply,
I wiring again the power supply to the Pi zero and that's work!
It's alive!
I wiring again the power supply to the Pi zero and that's work!
It's alive!
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: Alternative power supply help
Nice @albator!
Way to go!
Way to go!
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 392
- Joined: Thu Jun 09, 2016 4:17 am
- Location: uk
- Has thanked: 76 times
- Been thanked: 51 times
Re: Alternative power supply help
Just bought a few of these as cheaper options to powerboost, i just have a few questions please, firstly
when wiring the full size external usb (not micro) will I now just power this from the usb hub not direct from this like with the powerboost set up?
When adding an on off switch I put the switch inbetween the v+ and power strip, It works but the on position is off and the off position is on how do I correct this?
Thanks
when wiring the full size external usb (not micro) will I now just power this from the usb hub not direct from this like with the powerboost set up?
When adding an on off switch I put the switch inbetween the v+ and power strip, It works but the on position is off and the off position is on how do I correct this?
Thanks
Check out my modding and repair channel of retro and modern consoles:
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
https://www.youtube.com/channel/UCFz7yW ... GtQ/videos
Re: Alternative power supply help
On this one my one I switched the battery off but you can still use it the same way to turn the load on and off (v+)Lpoolm wrote:Just bought a few of these as cheaper options to powerboost, i just have a few questions please, firstly
when wiring the full size external usb (not micro) will I now just power this from the usb hub not direct from this like with the powerboost set up?
When adding an on off switch I put the switch inbetween the v+ and power strip, It works but the on position is off and the off position is on how do I correct this?
Thanks
- Attachments
-
- 20160901_001600.png (1.56 MiB) Viewed 5015 times
Who is online
Users browsing this forum: No registered users and 1 guest