Cool! I'm looking forward to it. It looks really good so farTok_Tok wrote:Ah windows
But good to know, then I'm done with the electronics. The case is being resin printed as we speak and I got all the parts to finish it so I hope it'll be ready soon!
Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
- sotasystems
- Posts: 160
- Joined: Sun Oct 09, 2016 4:56 am
- Location: Germany, 127.0.0.1
- Has thanked: 95 times
- Been thanked: 93 times
- Contact:
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Ladies and gentlemen, I would like to inform you that I am currently moving very far away, and therefore I am very busy.
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Any chance you could make a parts list? I've never forayed into the world of RPi, but after seeing this I've decided to give it a go. Maybe a touch ambitious for my first project, but I like stumbling along the way with things like this.
- sotasystems
- Posts: 160
- Joined: Sun Oct 09, 2016 4:56 am
- Location: Germany, 127.0.0.1
- Has thanked: 95 times
- Been thanked: 93 times
- Contact:
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Noland wrote:Any chance you could make a parts list? I've never forayed into the world of RPi, but after seeing this I've decided to give it a go. Maybe a touch ambitious for my first project, but I like stumbling along the way with things like this.
There is and always was a parts list included on the very first site with links to everything...
sotasystems wrote:
[spoiler="Parts list"][/spoiler]
- ARRIVED - Tri-Colour LED (RGB) for battery, charge and power indication
http://www.ebay.de/itm/172232033249?_tr ... EBIDX%3AIT- ARRIVED - Adafruit Powerboost 1000C
http://www.ebay.de/itm/282083284436?_tr ... EBIDX%3AIT- ARRIVED - USB Mini (rather than micro) Breakout
http://www.ebay.de/itm/282073486859?_tr ... EBIDX%3AIT- ARRIVED - Some random gameboy game to cover up
- My girlfriend gave me her old broken Tetris, which she had 2 of -- ARRIVED - Tactile switches
http://www.ebay.de/itm/291371993802?_tr ... EBIDX%3AIT- ARRIVED- 3 pin slide-switch
http://www.ebay.de/itm/140714113454?_tr ... EBIDX%3AIT- ARRIVED - a Leonardo micro instead of an Teensy (it's alot cheaper in germany)
http://www.ebay.de/itm/301951688967?_tr ... EBIDX%3AIT- ARRIVED - Volume wheel potentiometer
http://www.ebay.de/itm/322281495072?_tr ... EBIDX%3AIT- ARRIVED - 64 GB Samsung EVO micro SD card, which has been confirmed to work
http://www.ebay.de/itm/251970254487?_tr ... EBIDX%3AIT- ARRIVED - Common Ground DMG+ Control Panel with X, Y, L1 & L2, R1 & R2 from Kitsch-bent
http://www.ebay.de/itm/191968449407?_tr ... EBIDX%3AIT- ARRIVED - Gameboy classic buttons (2x)
http://www.ebay.de/itm/182258143348?_tr ... EBIDX%3AIT- ARRIVED- Gameboy Speaker
http://www.ebay.de/itm/181950378790?_tr ... EBIDX%3AIT- ARRIVED - Gameboy classic rubber pad set (2x)
http://www.ebay.de/itm/181814606804?_tr ... EBIDX%3AIT- ARRIVED - Spare USB ports (2x)
http://www.ebay.de/itm/130707477798?_tr ... EBIDX%3AIT- ARRIVED - Headphone jack w/ switch
http://www.ebay.de/itm/161337167416?_tr ... EBIDX%3AIT- ARRIVED - Audio amplifier
http://www.ebay.de/itm/322283374092?_tr ... EBIDX%3AIT- ARRIVED - 3.5" TFT screen w/ controller
http://www.ebay.de/itm/162128950289?_tr ... EBIDX%3AIT- ARRIVED - Complete gameboy classic shell
http://www.ebay.de/itm/331975728644?_tr ... EBIDX%3AIT- ARRIVED - 2500 mAh 3.7V battery
http://www.ebay.de/itm/391585262102?_tr ... EBIDX%3AIT- ARRIVED - PSP analog stick (2x)
http://www.ebay.de/itm/361351958328?_tr ... EBIDX%3AIT
Ladies and gentlemen, I would like to inform you that I am currently moving very far away, and therefore I am very busy.
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
And here I was thinking I wasn't blind!
-
- Posts: 50
- Joined: Wed May 11, 2016 8:20 am
- Has thanked: 14 times
- Been thanked: 7 times
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
hey tok tok is going to be for laser cutter? or 3d printer?Tok_Tok wrote:Thank you for responding.
I did as you said and it registers the x axis as well as the y axis in the serial monitor. I filled in the numbers i got from there and the stuttering is much less now. But when I test it in windows the cross in the test still won't go to the upper left and lower right corner.. I switched the the wires of the analog stick with A1 and A0 but that didn't help. I know I wired it right because when I control my mouse in windows with it, it works fine. So maybe it's a windows thing, I will try and test it when my housing is finished.
I'm building this if you're interested:
- sotasystems
- Posts: 160
- Joined: Sun Oct 09, 2016 4:56 am
- Location: Germany, 127.0.0.1
- Has thanked: 95 times
- Been thanked: 93 times
- Contact:
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Jusr another "extra" I have added to this gameboy:
This hole was left empty all time along, it was originaly intended for the contrast wheel. Yesterday I suddenly got an idea what to put in there.
A connector for composite and sound output, which also shuts off the internal speaker as soon as the cable is connected to it:
It's a pretty fun experience to play on a much bigger screen and it looks really amazing, despite it being "only" composite. It really suprised me
This hole was left empty all time along, it was originaly intended for the contrast wheel. Yesterday I suddenly got an idea what to put in there.
A connector for composite and sound output, which also shuts off the internal speaker as soon as the cable is connected to it:
It's a pretty fun experience to play on a much bigger screen and it looks really amazing, despite it being "only" composite. It really suprised me
Ladies and gentlemen, I would like to inform you that I am currently moving very far away, and therefore I am very busy.
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
-
- Posts: 219
- Joined: Wed Nov 16, 2016 3:04 am
- Location: UK
- Has thanked: 3 times
- Been thanked: 73 times
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
lovely build, was one of the first ones i looked at
forgive me for a silly question but what is the advantage of using a pi3 over a zero?
forgive me for a silly question but what is the advantage of using a pi3 over a zero?
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Pi3 is more powerful, plus it has built in wifi and bluetooth which is nice.
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
- sotasystems
- Posts: 160
- Joined: Sun Oct 09, 2016 4:56 am
- Location: Germany, 127.0.0.1
- Has thanked: 95 times
- Been thanked: 93 times
- Contact:
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
- No need for an USB hub, you have plenty of USB portsjellybelly wrote:lovely build, was one of the first ones i looked at
forgive me for a silly question but what is the advantage of using a pi3 over a zero?
- WiFi & Bluetooth
- Much speedier
- Higher compute power for demanding emulators
- A "real" audio output instead of PWM
Ladies and gentlemen, I would like to inform you that I am currently moving very far away, and therefore I am very busy.
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
UPDATE: I am still alive! My ISP is setting up my internet on the 19th of January at my new place, explaining my offline-ness.
If you write me a PM, I will very likely take some time to respond.
Also, my 2nd build will soon go on, so if you've been following it, please stay tuned!
Many thanks for your understanding!
Who is online
Users browsing this forum: No registered users and 1 guest