[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
-
- Posts: 1
- Joined: Mon Dec 05, 2016 3:23 pm
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Is it just me or do the button holes not line up? The marks I made on the case from the holes in the board are not centered to the holes on the bracket.
Also my screen is a little thicker than the bracket is designed for.
DarkStar2k
Also my screen is a little thicker than the bracket is designed for.
DarkStar2k
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
They line up perfect on my print, see pictures of first post. I mentioned printer and material tolerance so maybe there is that. Can you post pictures?DarkStar2k wrote:Is it just me or do the button holes not line up? The marks I made on the case from the holes in the board are not centered to the holes on the bracket.
Also my screen is a little thicker than the bracket is designed for.
DarkStar2k
- Funkenschuhster
- Posts: 26
- Joined: Mon Feb 06, 2017 6:54 am
- Location: Germany
- Has thanked: 8 times
- Been thanked: 5 times
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
I bought m3 someone need them?HoolyHoo wrote:https://www.amazon.com/uxcell-M2x3mmx3- ... ss+insertsGlyph wrote:Could you please point me to the brass inserts you bought, so I get ones with correct depht ?
Thank you very much
Or you can order 100 from Aliexpress cheaper and mor quantity but well you know, 2 month later (SpongeBob voice)
Need to be very careful inserting them as they are tiny and too little heat will take too long and melt the entire post and too much heat will clog the threads. Best way I found to do it insert a 6mm m2 screw with the insert on. Make sure screw is screwed about 1 mm past insert. Screw in the screw to the post until brass insert touches the post. Now apply a soldering iron at about 700 F to top of screw vertically and slowly push it in until insert is flush with top of post. I used a chisel tip as it fits in the screw head. Wait for part to cool then unscrew the screw. Should look like my part above.
- Funkenschuhster
- Posts: 26
- Joined: Mon Feb 06, 2017 6:54 am
- Location: Germany
- Has thanked: 8 times
- Been thanked: 5 times
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
EDIT: obsolete post. sorry @HoolyHoo
Last edited by Funkenschuhster on Thu Mar 09, 2017 9:55 am, edited 2 times in total.
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Did you consider USPS Flat Rate Envelope/Box? I think you can cut international shipping in half with those....just not sure why I can't see prices on their webpageHoolyHoo wrote: If you need it printed PM me and I can print it for you for $15 plus $2 shipping US only for SNES style or $13 if its the screen only with $2 shipping US only. Unfortunately international shipping has proven to be a hassle for a cheap rate, cost me $13.50 to ship international . Don't think many want to pay for that.
Or if someone here in Europe could print this parts and confirm it's a fitting print then shipping could be in range of 2€ I think.
Don't grow up.
It's a trap.
It's a trap.
- AJRedfern
- Posts: 85
- Joined: Wed Sep 07, 2016 4:29 am
- Has thanked: 53 times
- Been thanked: 54 times
- Contact:
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Just printed a couple of these (in UK) and they seem to have come out quite well, just need to tidy them up and test them.
AJRedfern - Author of the Game Boy Zero Splash Screen seen in Wermy's Custom Parts Guide Pt 2.
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440
Who is online
Users browsing this forum: No registered users and 1 guest