WII U Intel m5 Console

Want to show off your own project? Want to keep a build log of it? Post it here!
Post Reply
User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: Usa
Been thanked: 171 times
Contact:

WII U Intel m5 Console

Post by banjokazooie » Fri Jun 30, 2017 10:22 am

Here is my latest project build inside Wii u shell.

Features:
Windows 10, Full touch screen support, Intel m5 proccessor, 4GB RAM, 64GB SSD, 2k LCD, Bluetooth, WiFi, 128GB SD Card, Battery monitor software with automatic shut down function, Joysticks RGB lights switched with TV button.

Build materials:
Intel Core M vPro STK2MV64CC stick
Topfoison 2560*1440 1440p 2k ips lcd panel
7.2V 4000mAh battery
POLOLU-2865 Pololu 5V, 6A Step-Down Voltage Regulator D24V60F5
POLOLU-2813 Big Pushbutton Power Switch
Teensy 2.0++ USB AVR Development Board
2S 8A 7.4V Lithium Li-ion Battery Cell BMS
USB DAC Sound card
Stereo Amplifier
TP5100 2A battery charger module

Youtube video:
https://www.youtube.com/watch?v=4SFRtmE0mxg&t=65s
https://www.youtube.com/watch?v=WdmV7iIXdI0

Pictures:
Image

Image

Image

Image

Image

Image

Image

Teensy code:

Code: Select all

long previousMillis = 0;
long interval = 1000;
//BATTERY MONITOR
//float refVcc = 5.0;
//BUTTONS
const int DOWN_BUTTON = 29;
const int UP_BUTTON = 30;
const int LEFT_BUTTON = 31;
const int LB_BUTTON = 33;
const int LT_BUTTON = 34;
const int RIGHT_BUTTON = 35;
const int X_BUTTON = 4;
const int A_BUTTON = 5;
const int RT_BUTTON = 7;
const int RB_BUTTON = 8;
const int B_BUTTON = 9;
const int MINUS_BUTTON = 10;
const int PLUS_BUTTON = 11;
const int Y_BUTTON = 12;
const int LEFT_CLICK = 32;
const int RIGHT_CLICK = 28;
const int HOME_BUTTON = 20; // WINDOWS BUTTON
const int TV_BUTTON = 21;   //LED MODE BUTTON
//ANALOG
const int LEFT_VER = 45;
const int LEFT_HOR = 44;
const int RIGHT_VER = 43;
const int RIGHT_HOR = 42;
//RGB LED 
const int RLED_LEFT=14;
const int GLED_LEFT=15;
const int BLED_LEFT=16;
const int RLED_RIGHT=26;
const int GLED_RIGHT=25;
const int BLED_RIGHT=24;
//STATUS LED
const int HOME_RED = 22;
const int HOME_BLUE = 23;
const int LOW_LED = 13;
//COMPUTESTICK LED
int OFF = 39;
int val = 0;

boolean lastButton = HIGH;
boolean currentButton = LOW;

int LEDMODE = 0;


const int numButtons = 18;
byte allButtons[numButtons];
byte indexButtonPins[numButtons] = {UP_BUTTON, DOWN_BUTTON, LEFT_BUTTON, RIGHT_BUTTON, A_BUTTON, B_BUTTON, X_BUTTON, Y_BUTTON, MINUS_BUTTON, PLUS_BUTTON, LB_BUTTON, LT_BUTTON, RB_BUTTON, RT_BUTTON, LEFT_CLICK, RIGHT_CLICK, HOME_BUTTON, TV_BUTTON};

void setup() {

  Serial.begin(9600);

  Joystick.useManualSend(true);

  pinMode(UP_BUTTON, INPUT_PULLUP);
  pinMode(DOWN_BUTTON, INPUT_PULLUP);
  pinMode(LEFT_BUTTON, INPUT_PULLUP);
  pinMode(RIGHT_BUTTON, INPUT_PULLUP);
  pinMode(A_BUTTON, INPUT_PULLUP);
  pinMode(B_BUTTON, INPUT_PULLUP);
  pinMode(X_BUTTON, INPUT_PULLUP);
  pinMode(Y_BUTTON, INPUT_PULLUP);
  pinMode(MINUS_BUTTON, INPUT_PULLUP);
  pinMode(PLUS_BUTTON, INPUT_PULLUP);
  pinMode(LB_BUTTON, INPUT_PULLUP);
  pinMode(LT_BUTTON, INPUT_PULLUP);
  pinMode(RB_BUTTON, INPUT_PULLUP);
  pinMode(RT_BUTTON, INPUT_PULLUP);
  pinMode(LEFT_CLICK, INPUT_PULLUP);
  pinMode(RIGHT_CLICK, INPUT_PULLUP);
  pinMode(HOME_BUTTON, INPUT_PULLUP);
  pinMode(TV_BUTTON, INPUT_PULLUP);
  pinMode (RLED_LEFT, OUTPUT);
  pinMode (GLED_LEFT, OUTPUT);
  pinMode (BLED_LEFT, OUTPUT);
  pinMode (RLED_RIGHT, OUTPUT);
  pinMode (GLED_RIGHT, OUTPUT);
  pinMode (BLED_RIGHT, OUTPUT);
  pinMode (HOME_RED, OUTPUT);
  pinMode (HOME_BLUE, OUTPUT);
  pinMode (LOW_LED, OUTPUT);
  pinMode (OFF, INPUT);
  }  
boolean debounce(boolean last)
{
  boolean current = digitalRead(TV_BUTTON); 
  if (last != current)
  {
    delay(20);
    current = digitalRead(TV_BUTTON);
  }
  return current;
}


void setMode(int mode)
{
  //RED
  if (mode == 1)
  {
    digitalWrite(RLED_LEFT, LOW);
    digitalWrite(GLED_LEFT, HIGH);
    digitalWrite(BLED_LEFT, HIGH);
    digitalWrite(RLED_RIGHT, LOW);
    digitalWrite(GLED_RIGHT, HIGH);
    digitalWrite(BLED_RIGHT, HIGH);
  }
  //GREEN
  else if (mode == 2)
  {
    digitalWrite(RLED_LEFT, HIGH);
    digitalWrite(GLED_LEFT, LOW);
    digitalWrite(BLED_LEFT, HIGH);
    digitalWrite(RLED_RIGHT, HIGH);
    digitalWrite(GLED_RIGHT, LOW);
    digitalWrite(BLED_RIGHT, HIGH);
  }
  //BLUE
  else if (mode == 3)
  {
    digitalWrite(RLED_LEFT, HIGH);
    digitalWrite(GLED_LEFT, HIGH);
    digitalWrite(BLED_LEFT, LOW);
    digitalWrite(RLED_RIGHT, HIGH);
    digitalWrite(GLED_RIGHT, HIGH);
    digitalWrite(BLED_RIGHT, LOW);
  }
  //PURPLE (RED+BLUE)
  else if (mode == 4)
  {
    analogWrite(RLED_LEFT, 127);
    analogWrite(GLED_LEFT, 255);
    analogWrite(BLED_LEFT, 127);
    analogWrite(RLED_RIGHT, 127);
    analogWrite(GLED_RIGHT, 255);
    analogWrite(BLED_RIGHT, 127);
  }
  //TEAL (BLUE+GREEN)
  else if (mode == 5)
  {
    analogWrite(RLED_LEFT, 255);
    analogWrite(GLED_LEFT, 127);
    analogWrite(BLED_LEFT, 127);
    analogWrite(RLED_RIGHT, 255);
    analogWrite(GLED_RIGHT, 127);
    analogWrite(BLED_RIGHT, 127);
  }
  //ORANGE (GREEN+RED)
  else if (mode == 6)
  {
    analogWrite(RLED_LEFT, 50);
    analogWrite(GLED_LEFT, 127);
    analogWrite(BLED_LEFT, 255);
    analogWrite(RLED_RIGHT, 50);
    analogWrite(GLED_RIGHT, 127);
    analogWrite(BLED_RIGHT, 255);
  }
  //WHITE (GREEN+RED+BLUE)
  else if (mode == 7)
  {
    analogWrite(RLED_LEFT, 0);
    analogWrite(GLED_LEFT, 0);
    analogWrite(BLED_LEFT, 50);
    analogWrite(RLED_RIGHT, 0);
    analogWrite(GLED_RIGHT, 0);
    analogWrite(BLED_RIGHT, 50);
  }
  //OFF (mode = 0)
  else
  {
    digitalWrite(RLED_LEFT, HIGH);
    digitalWrite(GLED_LEFT, HIGH);
    digitalWrite(BLED_LEFT, HIGH);
    digitalWrite(RLED_RIGHT, HIGH);
    digitalWrite(GLED_RIGHT, HIGH);
    digitalWrite(BLED_RIGHT, HIGH);
  }
}



void loop() {

  
    int VOLTAGE = analogRead(A0);
    
    unsigned long currentMillis = millis();
    if(currentMillis - previousMillis > interval) {
      previousMillis = currentMillis; 
      Serial.println (VOLTAGE/4);
    }
       
         
    if (analogRead(A0) < 624)
    {
    digitalWrite(LOW_LED, HIGH);
    }
    else
    {
    digitalWrite(LOW_LED, LOW);
    }
    
    val = analogRead(OFF);
    
    if (val <500) 
    {
      digitalWrite(HOME_RED, LOW);
    }
    else
    {
     digitalWrite(HOME_RED, HIGH);
    }

    if (digitalRead(HOME_BUTTON) == LOW)
  {
    Keyboard.press(KEY_LEFT_GUI);
  }
  else
  {
    Keyboard.release(KEY_LEFT_GUI);
   }

  //digitalWrite(HOME_BLUE, HIGH);
  //digitalWrite(LOW_LED, HIGH);
  
  Joystick.X(map(analogRead(LEFT_HOR),215, 795, 0, 1023));
  Joystick.Y(map(analogRead(LEFT_VER),235, 855, 1023, 0));
  Joystick.sliderLeft(map(analogRead(RIGHT_HOR),210, 805, 1023, 0));
  Joystick.sliderRight(map(analogRead(RIGHT_VER),195, 805, 0, 1023));
  
  for (int i = 0; i < numButtons; i++) {
    if (digitalRead(indexButtonPins[i])) {
      allButtons[i] = 0;
    } else {
      allButtons[i] = 1;
    }
    Joystick.button(i + 1, allButtons[i]);
  }


  Joystick.send_now();
  delay(10);

{
  currentButton = debounce(lastButton);
  if (lastButton == LOW && currentButton == HIGH)
  {
    LEDMODE++;
  }
  lastButton = currentButton;
   if (LEDMODE == 8) LEDMODE = 0;
  setMode(LEDMODE);
}


}
Last edited by banjokazooie on Fri Jun 30, 2017 10:58 am, edited 1 time in total.

User avatar
Marty33
Posts: 145
Joined: Wed Feb 22, 2017 4:55 pm
Has thanked: 19 times
Been thanked: 13 times

Re: WII U Intel m5 Console

Post by Marty33 » Fri Jun 30, 2017 10:50 am

I receive step by step my components to work on the WiiU (old version) and..... i see this work...... you wan't to kill me !! :)

Very beautiful ! Very nice ! Very pure !

My question : i buy your last guidance, this screen : https://goo.gl/GrBkYF

I see your new screen, it looks much thinner (but very big motherboard), you think it's useless for the "raspberry project" ?

Big thanks

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: Usa
Been thanked: 171 times
Contact:

Re: WII U Intel m5 Console

Post by banjokazooie » Fri Jun 30, 2017 11:02 am

Marty33 wrote:
Fri Jun 30, 2017 10:50 am
I receive step by step my components to work on the WiiU (old version) and..... i see this work...... you wan't to kill me !! :)

Very beautiful ! Very nice ! Very pure !

My question : i buy your last guidance, this screen : https://goo.gl/GrBkYF

I see your new screen, it looks much thinner (but very big motherboard), you think it's useless for the "raspberry project" ?

Big thanks
The board i bigger but lcd is only 2.5mm thick means you can put driver board,usb hub,teensy,touchscreen constroller, fpc connectors behind my PCB plate and save a lot of space :D

codeman0624
Posts: 109
Joined: Wed Nov 23, 2016 10:19 am
Has thanked: 3 times
Been thanked: 74 times

Re: WII U Intel m5 Console

Post by codeman0624 » Fri Jun 30, 2017 11:05 am

Wow very impressive!! I had a hard time fitting just a Pi3 into the Wii U case. I never would have even thought of doing a project like this, very creative.

How long does the battery last?

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: Usa
Been thanked: 171 times
Contact:

Re: WII U Intel m5 Console

Post by banjokazooie » Fri Jun 30, 2017 11:12 am

codeman0624 wrote:
Fri Jun 30, 2017 11:05 am
Wow very impressive!! I had a hard time fitting just a Pi3 into the Wii U case. I never would have even thought of doing a project like this, very creative.

How long does the battery last?
On full load with wii u emu around 2 hours. With idling in windows draws almost the same like RPI3. The 7.2v lipo setup is more efficient than adafruit power boost and the new lcd draws only 300mA compared to the old lcd with 500mA.

User avatar
Marty33
Posts: 145
Joined: Wed Feb 22, 2017 4:55 pm
Has thanked: 19 times
Been thanked: 13 times

Re: WII U Intel m5 Console

Post by Marty33 » Fri Jun 30, 2017 12:29 pm

You think it's usefull to have 2k ips lcd for play with a Raspberry pi 3 ?

User avatar
banjokazooie
Posts: 211
Joined: Thu May 19, 2016 1:14 pm
Location: Usa
Been thanked: 171 times
Contact:

Re: WII U Intel m5 Console

Post by banjokazooie » Fri Jun 30, 2017 12:42 pm

Marty33 wrote:
Fri Jun 30, 2017 12:29 pm
You think it's usefull to have 2k ips lcd for play with a Raspberry pi 3 ?
Definitely it is an overkill and too expensive, but the picture quality of ips panel is exceptional and the saved space means bigger battery can be fitted and lower power consumption= more battery life.

Racerboy
Posts: 129
Joined: Thu Jun 02, 2016 4:49 pm
Has thanked: 25 times
Been thanked: 36 times

Re: WII U Intel m5 Console

Post by Racerboy » Fri Jun 30, 2017 2:16 pm

I'm impressed that this thing can run cemu at full speed. Did you have to change any of the graphics settings to get it to run well?

Apparently Breath of the Wild runs amazing on Cemu, when it came out for the Wii U it was their top priority to get it to run flawlessly, should give that a try sometime!

Also, is there a place you can buy that grey bracket that holds the original screen in separately?
Last edited by Racerboy on Fri Jun 30, 2017 2:25 pm, edited 1 time in total.

User avatar
Marty33
Posts: 145
Joined: Wed Feb 22, 2017 4:55 pm
Has thanked: 19 times
Been thanked: 13 times

Re: WII U Intel m5 Console

Post by Marty33 » Fri Jun 30, 2017 2:24 pm

Ok. I have to think about it.... i spent many money at this time :(

For the front buttons, i buy the original PCB and i thought i would use a FPC 20pins.
Image

But this solution take more place...

You think it's possible for somebody to made a version for oshpark.com (for example) and have my version ?

Second question : I see you not use nylon fixation. And your new solution is more compact. Any tips ?

Big thanks and.... BRAVO !

User avatar
muniosi
Posts: 100
Joined: Sun Jan 08, 2017 10:21 pm
Has thanked: 156 times
Been thanked: 31 times

Re: WII U Intel m5 Console

Post by muniosi » Fri Jun 30, 2017 3:06 pm

This is ridiculous. Your projects are always stupid polished and this is no exception. Excellent work banjokazooie!
I've just finished my milk.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest