Veteran's 1st GBZ (No Hot Glue) Completed

Show off your completed Game Boy Zero, or post your build logs here!
User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by VeteranGamer » Tue Jul 04, 2017 11:56 am

YaYa wrote:
Sun Jul 02, 2017 2:02 am
:D I would also appreciate if VeteranGamer could share the stl files for the shoulder buttons wells and the link to the used tactile buttons

Your build is amazing, bravo !


i've been a bit reluctant to share the stl file....

not because i dont want to share, but my 3d designs skills are very poor (i had never done any design or 3d printing until i started this project)

its a very basic design, easy for me to do (or as much as i could handle at the time).... a box on a cylinder with a hole going down the middle


Image


https://drive.google.com/file/d/0B2BZT9 ... sp=sharing


NB: any printed part will not be plug and play.... so modification will need to be done, based on the length of the tactile button used

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 689 times
Contact:

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by YaYa » Tue Jul 04, 2017 3:22 pm

Thank you very much for the share ! Don't worry for your skills, the aim of this board is helping each others...

I wanted to figure out how exactly everything was fitting and now i know !

If you allow me, I will make some mods to your file to perfectly fit 6x6x9mm momentary switches and also give a try to mod the stl for fitting the adafruit 12x12 pushbutton with round cap.
I would love having big buttons on the back :lol:
Follow me on instagram Image

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by VeteranGamer » Wed Jul 05, 2017 2:52 am

YaYa wrote:
Tue Jul 04, 2017 3:22 pm
Thank you very much for the share ! Don't worry for your skills, the aim of this board is helping each others...

I wanted to figure out how exactly everything was fitting and now i know !

If you allow me, I will make some mods to your file to perfectly fit 6x6x9mm momentary switches and also give a try to mod the stl for fitting the adafruit 12x12 pushbutton with round cap.
I would love having big buttons on the back :lol:
your more than welcomed to do what you want with the stl file.....

your best option would be to start a fresh design for the 12x12 tactile button.... as the design i did incorporates the part of the shell the screws go through, that part of the shell would have to be dremeled/drilled out to accomodate the 12x12...



there is also a great solution if you want larger buttons on the back...



viewtopic.php?f=27&t=2923


Image

Image

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 689 times
Contact:

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by YaYa » Wed Jul 05, 2017 3:27 am

Ooooh mate you're great !!! Thanks for the second link, i'm gonna take a look to this too :D
Follow me on instagram Image

User avatar
144TECH
Posts: 325
Joined: Fri Jan 06, 2017 7:30 am
Location: Amsterdam
Has thanked: 256 times
Been thanked: 71 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by 144TECH » Sat Dec 30, 2017 5:31 pm

Now dont get mad :mrgreen: but i am really wondering how you mounted it together, it says no hot glue.
So did you use regular glue, or did you click it in there or.. ? i think there's no way to escape some sort of glueing right.
Just wondering.. i like this build and i really mean it believe it or not.

Greets 144
* Very Rare * GBZ 640x480 v3 Stock Looks 6000MAH
http://www.sudomod.com/forum/viewtopic.php?f=43&t=4863

superman
Posts: 42
Joined: Wed Sep 04, 2019 12:08 pm
Has thanked: 12 times
Been thanked: 9 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by superman » Wed Sep 11, 2019 2:43 pm

I notice that to you controller pcb you only had data going to the pi not power. I am working on a GBZ, and it has a lot of extra boards inside (I wanted a keyboard chip inside and I am hooking up the controller with a Arduino). I was wondering if i could just hook up data pins to the pi and power to my main power strip board? Would this work of would it screw up the pi, since it is sharing not ground with the hub.

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by VeteranGamer » Thu Sep 12, 2019 2:31 am

superman wrote:
Wed Sep 11, 2019 2:43 pm
I was wondering if i could just hook up data pins to the pi and power to my main power strip board? Would this work of would it screw up the pi, since it is sharing not ground with the hub.

I cant really comment without actually seeing which board you have.....

if you open a post in this section....
viewforum.php?f=44

and provide a image/photo of what you have or are working with....
then either myself or another member can assist more....






.

superman
Posts: 42
Joined: Wed Sep 04, 2019 12:08 pm
Has thanked: 12 times
Been thanked: 9 times

Re: Veteran's 1st GBZ (No Hot Glue) Completed

Post by superman » Thu Sep 12, 2019 6:22 pm

I made the post.
viewtopic.php?f=44&t=8711
Thank you for any help you can provide.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest