mintyPi 2.0

General mintyPi-related chat goes here. Share ideas, ask questions that don't fit into the hardware/software help forums, etc.
User avatar
AJRedfern
Posts: 85
Joined: Wed Sep 07, 2016 4:29 am
Has thanked: 53 times
Been thanked: 54 times
Contact:

Re: mintyPi 2.0

Post by AJRedfern » Tue Jul 18, 2017 12:17 am

yogurtcup wrote:
Mon Jul 17, 2017 11:59 pm
Are you going the release the splash video you made?
I can do, I'd said to Wermy that as he was including it in the setup script/image that I wouldn't release it unless enough people requested for it. The first and last section have a slight mint green background to them and I had said I could alter this Hue for "flavors" if people liked.
AJRedfern - Author of the Game Boy Zero Splash Screen seen in Wermy's Custom Parts Guide Pt 2.
Image
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440

whatever_guy
Posts: 32
Joined: Sun Apr 23, 2017 8:21 pm
Has thanked: 75 times
Been thanked: 20 times

Re: mintyPi 2.0

Post by whatever_guy » Tue Jul 18, 2017 12:25 am

Just watched the finished guide, looks really cool, hope I can get some time to try this out soon, otherwise I'm sure there'll be some in the market place soon enough :lol:

Thanks Wermy and Helder for your time and effort on this very cool project!

User avatar
Kyran
Posts: 37
Joined: Mon Apr 24, 2017 10:58 am
Has thanked: 16 times
Been thanked: 4 times

Re: mintyPi 2.0

Post by Kyran » Tue Jul 18, 2017 12:36 am

What about a setup script? so we can use a pi zero 1.3 and snes won't lag. Every zero w I have lags on snes
The Pi Guy #retromod_customs

User avatar
Lphillimore
Posts: 993
Joined: Sat Jan 07, 2017 7:03 pm
Location: Perth, WA
Has thanked: 796 times
Been thanked: 527 times

Re: mintyPi 2.0

Post by Lphillimore » Tue Jul 18, 2017 12:37 am

...and for the icing on the cake, my 3D prints arrived today. What a night I have in store :D

I hereby name this day, mintyPi day :lol:

Great work on the guide too, Wermy.

Much appreciated!
Attachments
1so4su.jpg
1so4su.jpg (51.21 KiB) Viewed 8056 times

Holliday86
Posts: 34
Joined: Mon May 01, 2017 2:37 am
Has thanked: 8 times
Been thanked: 17 times

Re: mintyPi 2.0

Post by Holliday86 » Tue Jul 18, 2017 1:51 am

thank you guys so much. This is my afternoon sorted.

noshybabs
Posts: 11
Joined: Tue Jul 11, 2017 9:39 am
Has thanked: 2 times
Been thanked: 2 times

Re: mintyPi 2.0

Post by noshybabs » Tue Jul 18, 2017 3:34 am

This Looks great thanks for all the hard work.

I used this for the sound in my GBzero

https://goo.gl/pgcisu

Its very small, extremely cheap and works great with these little speakers. It might be better for something this small. I haven't seen anyone else using these so i thought i would share

User avatar
dryja123
Posts: 1076
Joined: Tue May 09, 2017 5:34 pm
Location: Central NJ
Has thanked: 239 times
Been thanked: 553 times

Re: mintyPi 2.0

Post by dryja123 » Tue Jul 18, 2017 5:27 am

Kyran wrote:
Tue Jul 18, 2017 12:36 am
What about a setup script? so we can use a pi zero 1.3 and snes won't lag. Every zero w I have lags on snes
It's found in the guide on the main SudoMod page, not the forums.

User avatar
diko_d
Posts: 33
Joined: Mon May 08, 2017 5:18 pm
Has thanked: 27 times
Been thanked: 18 times

Re: mintyPi 2.0

Post by diko_d » Tue Jul 18, 2017 7:54 am

Kyran wrote:
Tue Jul 18, 2017 12:36 am
What about a setup script? so we can use a pi zero 1.3 and snes won't lag. Every zero w I have lags on snes
Wermy, I second that.
I have a preset SD card with everything already set up in it. was hoping to use it instead of reflashing my card. You did mention in the past that you will have a setup script to run to configure the system instead of using the image. Is that still on? Will you make that available?

Thank you for everything! I got all my part and am eager to have at it :)

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: mintyPi 2.0

Post by Helder » Tue Jul 18, 2017 8:01 am

diko_d wrote:
Tue Jul 18, 2017 7:54 am
Kyran wrote:
Tue Jul 18, 2017 12:36 am
What about a setup script? so we can use a pi zero 1.3 and snes won't lag. Every zero w I have lags on snes
Wermy, I second that.
I have a preset SD card with everything already set up in it. was hoping to use it instead of reflashing my card. You did mention in the past that you will have a setup script to run to configure the system instead of using the image. Is that still on? Will you make that available?

Thank you for everything! I got all my part and am eager to have at it :)
As Wermy explained in the video the Written Guide will have all the info for the SD installations including the script which will work on any prebuilt image but not sure if anything else you installed or your config file settings might affect it's install though.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
wermy
Site Admin
Posts: 1346
Joined: Tue May 03, 2016 8:51 pm
Has thanked: 620 times
Been thanked: 1322 times
Contact:

Re: mintyPi 2.0

Post by wermy » Tue Jul 18, 2017 8:13 am

diko_d wrote:
Tue Jul 18, 2017 7:54 am
Kyran wrote:
Tue Jul 18, 2017 12:36 am
What about a setup script? so we can use a pi zero 1.3 and snes won't lag. Every zero w I have lags on snes
Wermy, I second that.
I have a preset SD card with everything already set up in it. was hoping to use it instead of reflashing my card. You did mention in the past that you will have a setup script to run to configure the system instead of using the image. Is that still on? Will you make that available?

Thank you for everything! I got all my part and am eager to have at it :)
I'll get the setup script posted today (I'll have a wiki page for the pre-made image). But the pre-made image will work fine on the non-w pi 0 anyway. Notice there's no special image from RetroPie's website just for the 0-W - it's all just Pi 0. :)
ImageImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest