[For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

[exodus]

Hi,

Apologies if this question was asked in the prior 17 pages (I'm posting versus scanning)...

Any chance you have tested your board with KITE's SAIO? From Kite's comment, sounds like his board will work with cart's that are working as a USB to SD adapter. So wanted to check if yours is USB or communicating in another way. Thanks

[prerunnerseth]

Hi,

Apologies if this question was asked in the prior 17 pages (I'm posting versus scanning)...

Any chance you have tested your board with KITE's SAIO? From Kite's comment, sounds like his board will work with cart's that are working as a USB to SD adapter. So wanted to check if yours is USB or communicating in another way. Thanks

I dont think anyone has tried yet.

[YaYa]

Are The 10 soldering pads that we see on the left of the board the spares pins described in your tip on your website ?

I need to access extra pins of the cart reader to be able to add stuffs like leds besides your board in the cartridge.

Thanks a lot for your reply !

PS : do you have some boards left lol, in case of a "yes" reply to my above question, i will order one and maybe will be The first to test your board with kite's SAIO lol (still have to wait current batch to be send, at the end of september 2017)

EDIT : page 11 of this post, i found the information, sorry for the convenience
Ok so i can order one lol.
Thanks for your work

[Roller Toaster]

Could you make a version of this for the other version of the cartridge, with the screw hole in a different spot?

[prerunnerseth]

Could you make a version of this for the other version of the cartridge, with the screw hole in a different spot?

Do you have a link to the cart you're talking about?

[YaYa]

Could you make a version of this for the other version of the cartridge, with the screw hole in a different spot?

Do you have a link to the cart you're talking about?

https://handheldlegend.com/products/gam ... eplacement

[prerunnerseth]

Could you make a version of this for the other version of the cartridge, with the screw hole in a different spot?

Do you have a link to the cart you're talking about?

https://handheldlegend.com/products/gam ... eplacement

Quite sure i can make one board work for either, but i just placed an order for 200 more boards. I will have to sell those before i order some that work with both.

[YaYa]

You could make a single board with two holes, so anyone can use your board with any cartridge !

EDIT : Woops lol, didn't see your post *sigh*

[Roller Toaster]

Quite sure i can make one board work for either, but i just placed an order for 200 more boards. I will have to sell those before i order some that work with both.

Would your existing one work if I widened the top hole, or are there subsurface components that I might accidentally break?

[prerunnerseth]

Quite sure i can make one board work for either, but i just placed an order for 200 more boards. I will have to sell those before i order some that work with both.

Would your existing one work if I widened the top hole, or are there subsurface components that I might accidentally break?

if you are careful not to break any of the traces then yes, it should be fine.