[Solved] Button 5 Not Working
[Solved] Button 5 Not Working
I have 3 of the v0.6 that I made with just the four button config and everything was working fine. I am adding the shoulder buttons from eriK_gee and running into an issue. I have the buttons wired as usual with the supplied wire harnesses and am running into an issue with mapping. Every time I try to map the R button to button 5 I get nothing. I have tried swapping the wiring harness from L and R to see if it's a connection issue, but the problem is specifically mapping to button 5. I have no idea what I need to check/do next. Any help?
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: Button 5 Not Working
Picture of what you are connecting them to? You can use ANY of the L1/L2/R1/R2 ports, it doesn't matter about their name, as you map it in gui.. so just use another one
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Re: Button 5 Not Working
I figured it out. I assumed that the wiring harness for the back buttons would use black as the ground, not the yellow.
Re: [Solved] Button 5 Not Working
Hurm, I'm having the same problem. Everything works but R1. I've desoldered and resoldered it with same results. Black is showing as ground to me not yellow. Maybe a mix up on some boards. If you used yellow as ground did you use black as button(or the red?)
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: [Solved] Button 5 Not Working
Show a picture of how you have it connected or planning to
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Who is online
Users browsing this forum: No registered users and 1 guest