GB Null Kit

If you'd like to gauge interest in an idea before putting it into production, do it here!
User avatar
Ampersand
Posts: 94
Joined: Fri Aug 04, 2017 3:52 am
Has thanked: 21 times
Been thanked: 116 times

Re: Game Boy Null Kit

Post by Ampersand » Wed May 09, 2018 6:13 am

Update: I'm putting together 20 kits and a build guide, I'll have a Tindie link available soon.

User avatar
Italian77
Posts: 142
Joined: Thu Feb 22, 2018 8:54 pm
Has thanked: 50 times
Been thanked: 41 times

Re: Game Boy Null Kit

Post by Italian77 » Wed May 09, 2018 9:03 pm

I see that they made Clear and Clear Matte. You used just straight up clear right. Here is a pic of the settings. Does that seem correct?
Attachments
GBN.png
GBN.png (45.12 KiB) Viewed 1707 times
My first Circuit Sword build - Custom Painted
https://sudomod.com/forum/viewtopic.php?f=43&t=5855

User avatar
Ampersand
Posts: 94
Joined: Fri Aug 04, 2017 3:52 am
Has thanked: 21 times
Been thanked: 116 times

Re: Game Boy Null Kit

Post by Ampersand » Thu May 10, 2018 2:54 am

Italian77 wrote:
Wed May 09, 2018 9:03 pm
I see that they made Clear and Clear Matte. You used just straight up clear right. Here is a pic of the settings. Does that seem correct?
No! You've got the thicknesses backwards.
3mm = 0.118
5mm = 0.220
Yes it's normal clear acrylic, not clear matte

User avatar
Italian77
Posts: 142
Joined: Thu Feb 22, 2018 8:54 pm
Has thanked: 50 times
Been thanked: 41 times

Re: Game Boy Null Kit

Post by Italian77 » Thu May 10, 2018 5:12 am

Holy cow! I knew that correct thickness. I can’t believe I swapped it. Thanks for catching that.

I loaded one file at a time at first from the site and had the size correct but it would not add both to the cart. The only way to add both to the cart was to download them first then upload them to get them into one project.

I subconsciously went smallest to largest and didn’t double check the file names. I’m usually more thourough than that.
Last edited by Italian77 on Sat May 12, 2018 9:32 pm, edited 2 times in total.
My first Circuit Sword build - Custom Painted
https://sudomod.com/forum/viewtopic.php?f=43&t=5855

sygyzy
Posts: 190
Joined: Tue Sep 05, 2017 12:45 pm
Has thanked: 52 times
Been thanked: 32 times

Re: Game Boy Null Kit

Post by sygyzy » Thu May 10, 2018 2:30 pm

ThompsonTinkers wrote:
Tue May 08, 2018 6:23 pm
Looks like the screw holes are sized for M2.5 screws. Those should be readily available through McMaster-Carr (for Americans) or Amazon small parts.

That said, they should also accommodate a #4-40 SAE machine screw if you are stuck on that sort of thing.

If you are comfortable drilling, you can use the original hole as a pilot and widen it for #6-32. Use a sharp bit, support the work, and use light pressure and it will be fine. You’ll have to do the same to the PCB, but I don’t think you’d hit anything important.
How about we don't introduce more "Standard" conversions to a metric build. I would prefer if we stuck with metric all around; the only reason we are even having this discussion is we were trying to find the Ponoko equivalently sized acrylic sheets.

User avatar
Ampersand
Posts: 94
Joined: Fri Aug 04, 2017 3:52 am
Has thanked: 21 times
Been thanked: 116 times

Re: Game Boy Null Kit

Post by Ampersand » Thu May 10, 2018 2:39 pm


How about we don't introduce more "Standard" conversions to a metric build. I would prefer if we stuck with metric all around; the only reason we are even having this discussion is we were trying to find the Ponoko equivalently sized acrylic sheets.
I'm about to share a link to the build guide, you'll be pleased to see it primarily uses metric and only includes the imperial measurements for the acrylic sheet thicknesses :D

User avatar
Ampersand
Posts: 94
Joined: Fri Aug 04, 2017 3:52 am
Has thanked: 21 times
Been thanked: 116 times

Re: Game Boy Null Kit

Post by Ampersand » Thu May 10, 2018 3:51 pm

Here's my build guide: https://1drv.ms/b/s!AqMvwiYIMMtmjEArs95cerX9eGHc
SpoilerShow
Exploded null.png
Exploded null.png (160.74 KiB) Viewed 1656 times

User avatar
Italian77
Posts: 142
Joined: Thu Feb 22, 2018 8:54 pm
Has thanked: 50 times
Been thanked: 41 times

Re: Game Boy Null Kit

Post by Italian77 » Thu May 10, 2018 4:24 pm

There are three plates in the build guide above, but only two files on Ponoko.
My first Circuit Sword build - Custom Painted
https://sudomod.com/forum/viewtopic.php?f=43&t=5855

User avatar
Ampersand
Posts: 94
Joined: Fri Aug 04, 2017 3:52 am
Has thanked: 21 times
Been thanked: 116 times

Re: Game Boy Null Kit

Post by Ampersand » Thu May 10, 2018 4:36 pm

Italian77 wrote:
Thu May 10, 2018 4:24 pm
There are three plates in the build guide above, but only two files on Ponoko.
Do you mean the black plate in the middle? That's the PCB, not a piece of acrylic, it's labelled...

On the first page, all the green parts are cut from the same 3mm acrylic sheet, and all the orange parts are cut from the same 5mm sheet.
Do you have any software you can use to open up the design files and look at them?

User avatar
Italian77
Posts: 142
Joined: Thu Feb 22, 2018 8:54 pm
Has thanked: 50 times
Been thanked: 41 times

Re: Game Boy Null Kit

Post by Italian77 » Thu May 10, 2018 5:16 pm

I was referring to the one outer and 2 inner plates. I’m guessing one of the two files has two plates. I just can’t open them
My first Circuit Sword build - Custom Painted
https://sudomod.com/forum/viewtopic.php?f=43&t=5855

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests