Hello Sudomoders , ever since my son started to read up on some of these awesome posts the more excited he gets always talking about how he would design or build a game boy, so i decided to help him out
didn't want to spend to much time on fusion 360 so i look up couple design on Thingivere and my eyes got caught on SuperGamegirl but that desing was meant to use with their own pcb. I really like the cad as it was plain and simple so here i'm on fusion starting from scratch I had a couple left overs parts from previous robots projects so that was a plus, end up using a raspberry pi 3 pimoroni 3.5 Hyperpixel would love to use Helder pcb but with no luck so i settle for Tinkerboy pcb hope his new design is lot more slimmer. so my daughter now is asking to make her one too,All the colors combo was choose by them.Well enough talk let the pictures do the rest.
3D Printed GameboyPi3
- EVE-TECH
- Posts: 75
- Joined: Wed Aug 09, 2017 9:21 pm
- Location: FLORIDA
- Has thanked: 45 times
- Been thanked: 44 times
3D Printed GameboyPi3
- Attachments
-
- DSC04136.jpg (6.57 MiB) Viewed 3797 times
-
- DSC04135.jpg (6.2 MiB) Viewed 3797 times
-
- DSC04132.jpg (9.36 MiB) Viewed 3797 times
-
- DSC04131.jpg (6.38 MiB) Viewed 3797 times
-
- DSC04130.jpg (7.56 MiB) Viewed 3797 times
-
- DSC04128.jpg (5.81 MiB) Viewed 3797 times
-
- DSC04125.jpg (3.7 MiB) Viewed 3797 times
-
- DSC04124.jpg (3.8 MiB) Viewed 3797 times
-
- DSC04123.jpg (5.8 MiB) Viewed 3797 times
-
- DSC04118.jpg (9.08 MiB) Viewed 3797 times
-
- DSC04122.jpg (9.11 MiB) Viewed 3797 times
- EVE-TECH
- Posts: 75
- Joined: Wed Aug 09, 2017 9:21 pm
- Location: FLORIDA
- Has thanked: 45 times
- Been thanked: 44 times
Re: 3D Printed GameboyPi3
The white is my daughter
- Attachments
-
- DSC04155.jpg (3.63 MiB) Viewed 3796 times
-
- DSC04153.jpg (9.26 MiB) Viewed 3796 times
-
- DSC04150.jpg (5.78 MiB) Viewed 3796 times
-
- DSC04149.jpg (8.67 MiB) Viewed 3796 times
-
- DSC04148.jpg (8.95 MiB) Viewed 3796 times
-
- DSC04146.jpg (2.98 MiB) Viewed 3796 times
-
- DSC04145.jpg (7.48 MiB) Viewed 3796 times
-
- DSC04144.jpg (7.67 MiB) Viewed 3796 times
-
- DSC04138.jpg (7.02 MiB) Viewed 3796 times
- ThompsonTinkers
- Posts: 39
- Joined: Sat Jan 28, 2017 9:36 pm
- Has thanked: 57 times
- Been thanked: 20 times
Re: 3D Printed GameboyPi3
Nice work!
Looks like you printed the back shell upside down with support?
Looks like you printed the back shell upside down with support?
- EVE-TECH
- Posts: 75
- Joined: Wed Aug 09, 2017 9:21 pm
- Location: FLORIDA
- Has thanked: 45 times
- Been thanked: 44 times
Re: 3D Printed GameboyPi3
ThompsonTinkers wrote: ↑Tue May 29, 2018 8:14 pmNice work!
Looks like you printed the back shell upside down with support?
nope other way around with support and mildly sand down follow with clearcoat
Who is online
Users browsing this forum: No registered users and 1 guest