First power on test - USB / Arduino fail
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: First power on test - USB / Arduino fail
Hi Kite,
Sorry to resurrect an old post - I'm having this same issue - USBHUB is not lighting
Continuity between the pins is fine.
Is the USBHUB dead? And if so - is it fixable?
It was booting fine and working away - but not the power button is having no effect - If I short the pads POWER SWITCH on the board it boots normally...
Sorry to resurrect an old post - I'm having this same issue - USBHUB is not lighting
Continuity between the pins is fine.
Is the USBHUB dead? And if so - is it fixable?
It was booting fine and working away - but not the power button is having no effect - If I short the pads POWER SWITCH on the board it boots normally...
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: First power on test - USB / Arduino fail
Can you show pics of how the USB is soldered? It's all about the USB soldering (the USB data lines from pi to saio)
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: First power on test - USB / Arduino fail
Hi Kite,
Here are some images - are these any good to help diagnose?
EDIT: Google Photos is a pain - these were working - now moved to Imgur, can you see them now?
Sorry for the messing...
Here are some images - are these any good to help diagnose?
SpoilerShow
SpoilerShow
SpoilerShow
SpoilerShow
Sorry for the messing...
Last edited by gilbertotron on Mon Apr 01, 2019 5:03 am, edited 1 time in total.
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: First power on test - USB / Arduino fail
I'm afraid those images don't show up, could you attach or upload somewhere public? (e.g. imgur)gilbertotron wrote: ↑Sun Mar 31, 2019 10:25 amHi Kite,
Here are some images - are these any good to help diagnose?
..
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: First power on test - USB / Arduino fail
Hi Kite
Sorry Google Photo = pain
These should be working now. Sorry for the mistake.
Cheers
Sorry Google Photo = pain
These should be working now. Sorry for the mistake.
Cheers
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: First power on test - USB / Arduino fail
Those Pi USB solder pads, can you check with a DMM that they aren't shorted together (resistance/beep mode, and a probe on each of those pads).
Also, can you probe the back of the Pi USB connector and the connector on the board. DP should connect to DP and same for DM. These pics should help:
If all is lost, it is possible to wire it like so without using those solder holes:
Also, can you probe the back of the Pi USB connector and the connector on the board. DP should connect to DP and same for DM. These pics should help:
If all is lost, it is possible to wire it like so without using those solder holes:
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: First power on test - USB / Arduino fail
Hi Kite,
DM - DM = continuity
DP - DP = continuity
DM - DP = no continuity on either pi or board.
Pi USB solder pads - I have not tested unfortunately - I will and get back to you - I never thought to check them...
Thanks for getting back to me.
DM - DM = continuity
DP - DP = continuity
DM - DP = no continuity on either pi or board.
Pi USB solder pads - I have not tested unfortunately - I will and get back to you - I never thought to check them...
Thanks for getting back to me.
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: First power on test - USB / Arduino fail
When you say DP-DP continuity, from which DP to which DP are you measuring? It's important to do them as pictured above
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
- gilbertotron
- Posts: 99
- Joined: Mon Oct 24, 2016 10:07 am
- Has thanked: 327 times
- Been thanked: 25 times
Re: First power on test - USB / Arduino fail
I did a continuity test from the pin you have labeled DP on the Pi's USB and the pin you have labeled DP on the AIO.
And the meter beeped - so i guess that there is continuity between those pins - the same happened with DM - DM
But there was no continuity between the pins DP-DM on the pi or the AIO.
Is that more clear? I'm unfortunately away from my home for a few days and so won't be able to test anything tonight.
Thanks for your help.
And the meter beeped - so i guess that there is continuity between those pins - the same happened with DM - DM
But there was no continuity between the pins DP-DM on the pi or the AIO.
Is that more clear? I'm unfortunately away from my home for a few days and so won't be able to test anything tonight.
Thanks for your help.
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: First power on test - USB / Arduino fail
Ok I see, well that all sounds good to be honest! That is how it should be.
When in tester mode, they all say 'FAIL' right?
When in tester mode, they all say 'FAIL' right?
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Who is online
Users browsing this forum: No registered users and 1 guest