Melted face plate again
Melted face plate again
So this crap happened again. I initiated a shutdown by closing the pi, the battery had half a charge, and I noticed that the tin was getting warm in my pocket. I get home and the the faceplate is actually smoking, and I have to quickly open it up to take out the battery. The screen showed that the pi kept recycling the reboot process and the pi itself was very hot. I used a different speaker then last time and the sound was turned off. So what is happening? Also it was the latest image.
- Attachments
-
- IMG_1369.jpg (2.17 MiB) Viewed 1902 times
-
- IMG_1368.jpg (3.05 MiB) Viewed 1902 times
-
- IMG_1367.jpg (2.12 MiB) Viewed 1902 times
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Melted face plate again
No idea, it might be a bad pi or bad pcb or you have a short somewhere. Send me the whole thing back as is and I'll replace the audio chip or the controller pcb if it's faulty. I'll check the Pi too to see if that's not the issue as well.
Don't expect me to offer any of these services to anyone else, the reason I am is that it could be a fault in that kit and you're likely to ruin it trying to remove the pi or chip.
Don't expect me to offer any of these services to anyone else, the reason I am is that it could be a fault in that kit and you're likely to ruin it trying to remove the pi or chip.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: Melted face plate again
Thank you Helder I appreciate your offer. I'll message you later about the details.
Who is online
Users browsing this forum: No registered users and 1 guest