So I just got done revamping my CS and now I an having WiFi issues.
When I get to the main screen, it will not connect to WiFi. I go in to the RetroPie menu and go to connect to a WiFi network and I get a message saying "No wlan0 interface detected".
Long story short, it only happens when I have the case screwed together.
I have tried:
Turning WiFi off, waiting 30 sec, and turning it back on
Replacing the kapton tape
Reflowing the WiFi module
Putting the old CM3 back in
All of which yield the same results. Any ideas of how to fix this?
WiFi Issues
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
WiFi Issues
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: WiFi Issues
So every time when the case is apart it works fine? Is there anything that is pressing on the CM3 when the case is being closed? The cables for the back board perhaps may get in the way.
Could you grab the logs files https://github.com/kiteretro/Circuit-Sw ... -log-files when it does the no wifi thing? Ideally as the last thing or "just happened" state
Could you grab the logs files https://github.com/kiteretro/Circuit-Sw ... -log-files when it does the no wifi thing? Ideally as the last thing or "just happened" state
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
- LilTrublMakr
- Posts: 365
- Joined: Sun Aug 05, 2018 6:39 am
- Has thanked: 24 times
- Been thanked: 120 times
- Contact:
Re: WiFi Issues
Update on this, it seems to be plugged in or not rather than the case being open or not. I can plug it in and start it and WiFi works but if I start it from battery, it doesn't. It stays on if I start it plugged in and unplug it once I see it has a connection. I can honestly live with that.
@LilTrublMakr
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
My website
My shop
My MintyPi Services
wpa_supplicant generator
Sudomod Wiki Links:
-mintyPi FaQ
-mintyPi V3: parts, tools needed, build guide, and software
-mintyPi V3: How to connect to WiFi and transfer ROMs. A step by step picture guide!
My projects:
Circuit Sword CM3 Build
Who is online
Users browsing this forum: No registered users and 1 guest