[FOR SALE] Picicle a portable games console

[Picicle]

http://imgur.com/a/yNVuUl7

Check resistance between GND and pin 2 of TP4056. It should be 1.2kOhm. More there is nothing to break, except for TP4056 itself...

[rodocop]

http://imgur.com/a/yNVuUl7

Check resistance between GND and pin 2 of TP4056. It should be 1.2kOhm. More there is nothing to break, except for TP4056 itself...

When measured I see 1.196kOhm.

[Picicle]

When measured I see 1.196kOhm.

So, change TP4056.
Will you find it yourself or will I send it by mail?
PS Put solder on the pins of the chip less.

[rodocop]

If you know a link where I can buy one easily (digikey, arrow). I can buy on my own. It will take quite a while for one to reach Canada, if you ship it from Russia.

[Picicle]

If you know a link where I can buy one easily (digikey, arrow). I can buy on my own. It will take quite a while for one to reach Canada, if you ship it from Russia.

If you need fast buy a PCB with TP4056. Need hot air blower for remove chip.

[rodocop]

If you know a link where I can buy one easily (digikey, arrow). I can buy on my own. It will take quite a while for one to reach Canada, if you ship it from Russia.

If you need fast buy a PCB with TP4056. Need hot air blower for remove chip.

I have a hot air station. And tp4056 charge boards. But the IC chips on them have different labels. Was not sure if they would act the same.

[Picicle]

But the IC chips on them have different labels. Was not sure if they would act the same.

How is it labeled? TP4056 & TC4056 are the same.

[rodocop]

But the IC chips on them have different labels. Was not sure if they would act the same.

How is it labeled? TP4056 & TC4056 are the same.

It was TC4056A. I installed it, and now it charges fine.

I still have pi freezing though, segmentation fault. So it's either a bad pi, or 6 bad memory cards....since I've tried 6 sd cards I'll assume the pi is bad....

[sandog]

I have 3 batteries if anyone needs 1 in the US

[sandog]

What would cause white screen after Picicle logo during bootup.. will just stay on white screen