3.5 DPI Screens

From sudomod
Revision as of 22:29, 25 November 2017 by Chaosratt (Talk | contribs) (3.5" DPI Screens: added u-geek display)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

3.5" DPI Screens

Pimoroni HyperPixel

Adafruit pimoroni hyperpixel.jpg Website adafruit.com (US)

pimoroni.com (UK/EU)

Seller Adafruit or Pimoroni
Nominal Price $45 USD

£40

Input DPI
Resolution 800 x 480 px
Screen Dimensions 86 x 56 x 10 mm (with headers)
Active Area Dimensions unknown
Button Board n/a, PWM controlled over GPIO
5v Ready Yes
Touch Yes, Capacitive, 2-point Multi-TOuch
Used in Projects unknown
Notes
  • Header appears to be surface mounted and thus not difficult to remove if desired, however you will need to wire out nearly every GPIO.
  • Included header seems to be very low profile.
  • Screen Width appears to be exactly the outer DMG dimensions, meaning this likely won't fit.

U-GEEK

UGEEK 3.5in dpi screen.jpg Website aliexpress.co
Seller U-GEEK
Nominal Price $40 USD
Input DPI
Resolution 800 x 480 px
Screen Dimensions 89 x 56 x 21 mm (with headers)
Active Area Dimensions unknown
Button Board n/a,
5v Ready Yes
Touch No
Used in Projects unknown
Notes
  • Phat header.
  • Is physically larger than the DMG case.
  • Has a soft I2C pinout on the underside, along with 2 GPIO available buttons, a button controlled back-light, and IR transceiver.