Difference between revisions of "GBZ Misc Hardware"

From sudomod
Jump to: navigation, search
m (L/R Buttons)
m (3D Printed Parts: added a bunch more parts I found on thingiverse)
 
(13 intermediate revisions by 5 users not shown)
Line 4: Line 4:
 
If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this:
 
If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this:
 
http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or [http://www.banggood.com/100Pcs-Tactile-Push-Button-Switch-Tact-Switch-6X6X10mm-4-Pin-DIP-p-1000844.html?p=9B1915347037201311DI this]
 
http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or [http://www.banggood.com/100Pcs-Tactile-Push-Button-Switch-Tact-Switch-6X6X10mm-4-Pin-DIP-p-1000844.html?p=9B1915347037201311DI this]
 +
 +
==Replacement case==
 +
A replacement case for the gameboy can be found [http://www.banggood.com/OEM-Full-Housing-Shell-for-Nintendo-Gameboy-Classic-GB-DMG-Console-p-973616.html?p=9B1915347037201311DI here].
 +
 +
==Audio Jack==
 +
In case you can not use the audio jack of the original GBZ board [http://www.banggood.com/25Pcs-3_5MM-Two-Channel-Audio-Jack-Socket-For-Headphone-Earphone-Headset-Microphone-p-1059606.html?p=9B1915347037201311DI here] is a replacement.
 +
 +
==Power Switch==
 +
If you don't have the power switch from the GBZ board or are unable to desolder it you can use [http://www.banggood.com/5pcs-6-Pins-Slide-Switch-OnOn-Vertical-Mini-Miniature-Terminals-p-993806.html?p=9B1915347037201311DI this switch].
 +
 +
Due to space constraints in the Gameboy DMG case, it may be advisable to use a replacement switch with terminals on the side, instead of the one listed above.  [http://www.ebay.co.uk/itm/20Pcs-6mm-High-Side-Knob-6-Pin-2-Position-DPDT-Slide-Switch-0-5A-50VAC-SK22H03/282012438100 Here], [https://www.amazon.com/0-5A-Horizontal-Slide-Switch-SK22H03/dp/B008DFYRG2 here], and [http://www.ebay.com/itm/20Pcs-6mm-High-Side-Knob-6-Pin-2-Position-DPDT-Slide-Switch-0-5A-50VAC-SK22H03-/282012438100 here] are some choices.
 +
 +
==Micro SD Card==
 +
[http://www.banggood.com/32GB-Class-10-Micro-SD-TF-Micro-SD-Card-For-Mobile-Phone-p-975787.html?p=9B1915347037201311DI 32 Gb micro SD card] to install RetroPie on and roms.
 +
 +
==Prototype PCB==
 +
[http://www.banggood.com/10Pcs-5X10cm-Single-Side-Copper-Prototype-Paper-PCB-Breadboard-2-3-5-Joint-Hole-p-1043222.html?p=9B1915347037201311DI Protoytype PCB] to create power distribution board or GPIO sound output for the RPi Zero.
 +
 +
==Step-Up Modules (Voltage Regulators)==
 +
[http://www.aliexpress.com/item/DC-DC-Boost-Step-UP-Converter-1-5-3V-3-7V-4-5V-to-5V-Voltage/32409755078.html 0-5V to 5V - 1,89$]<br />
 +
[http://www.aliexpress.com/item/2016-New-8W-USB-Input-DC-DC-5V-to-12V-Converter-Step-Up-Module-Power-Supply/32652419233.html 5V to 12V - 1,90$]<br />
 +
[https://www.pololu.com/category/84/regulators-and-power-supplies Wide Range Steup or Step Down regulators]
 +
 +
== Battery leads/JST Plug  ==
 +
Trying to wire a custom battery up to a PowerBoost? Need JST 2.0 PH type leads. [https://www.aliexpress.com/store/product/50-SETS-Mini-Micro-JST-2-0-PH-2-Pin-Connector-Plug-with-Wires-Cables-120MM/1360129_32824363436.html Here]
 +
 +
== 3D Printed Parts ==
 +
Power Switch holder: [http://sudomod.com/wp-content/uploads/2016/09/gbz_power_switch_brace.stl_.zip stl files] or [http://sudomod.com/forum/viewtopic.php?f=3&t=1482 buy]
 +
 +
GBA Cart slot holder: [http://sudomod.com/wp-content/uploads/2016/09/gbz_gba_cartridge_mount.zip stl files] or [http://sudomod.com/forum/viewtopic.php?f=3&t=1483 buy]
 +
 +
Top Screw brackets: [http://sudomod.com/wp-content/uploads/2016/07/gbz_top_screw_bracket_with_guides.stl_.zip stl files] or [http://sudomod.com/forum/viewtopic.php?f=3&t=789 buy]
 +
 +
Button wells: [http://sudomod.com/wp-content/uploads/2016/07/gbz_button_wells.stl_.zip stl files] or [http://sudomod.com/forum/viewtopic.php?f=3&t=923 buy]
 +
 +
Screen Bracket with X/Y buttons: [https://www.thingiverse.com/thing:2033239 Thingiverse]
 +
 +
Alternate 2-part Screen Bracket with X/Y buttons & drill guide: [https://www.thingiverse.com/thing:2311662 Thingiverse]
 +
 +
Alternate Top screw bracket with HDMI holder: [https://www.thingiverse.com/thing:2319250 Thingiverse]
 +
 +
Drill guide for centered back buttons: [https://www.thingiverse.com/thing:2466985 Thingiverse]
 +
 +
Fake cart to hold a full-size SD card reader: [https://www.thingiverse.com/thing:2102808 Thingiverse]
 +
 +
Holder for a dremel-free battery install: [https://www.thingiverse.com/thing:1418834 Thingiverse]
 +
 +
Button Wells with integrated drill guide: [https://www.thingiverse.com/thing:2173083 Thingiverse]
 +
 +
Cart shell: [https://www.thingiverse.com/thing:13605 Thingiverse]
 +
 +
== HDMI Cables ==
 +
 +
Thin ribbon cable: [https://www.ebay.com/itm/252508906577?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT ebay]

Latest revision as of 02:42, 4 December 2017

GPIO PWM Audio for Raspberry Pi Zero

150 Ohm resistor, 270 Ohm resistor, 10nF capacitor, and a 33nF capacitor (another 10nF will work fine as well if that’s easier to find)

L/R Buttons

If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this: http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or this

Replacement case

A replacement case for the gameboy can be found here.

Audio Jack

In case you can not use the audio jack of the original GBZ board here is a replacement.

Power Switch

If you don't have the power switch from the GBZ board or are unable to desolder it you can use this switch.

Due to space constraints in the Gameboy DMG case, it may be advisable to use a replacement switch with terminals on the side, instead of the one listed above. Here, here, and here are some choices.

Micro SD Card

32 Gb micro SD card to install RetroPie on and roms.

Prototype PCB

Protoytype PCB to create power distribution board or GPIO sound output for the RPi Zero.

Step-Up Modules (Voltage Regulators)

0-5V to 5V - 1,89$
5V to 12V - 1,90$
Wide Range Steup or Step Down regulators

Battery leads/JST Plug

Trying to wire a custom battery up to a PowerBoost? Need JST 2.0 PH type leads. Here

3D Printed Parts

Power Switch holder: stl files or buy

GBA Cart slot holder: stl files or buy

Top Screw brackets: stl files or buy

Button wells: stl files or buy

Screen Bracket with X/Y buttons: Thingiverse

Alternate 2-part Screen Bracket with X/Y buttons & drill guide: Thingiverse

Alternate Top screw bracket with HDMI holder: Thingiverse

Drill guide for centered back buttons: Thingiverse

Fake cart to hold a full-size SD card reader: Thingiverse

Holder for a dremel-free battery install: Thingiverse

Button Wells with integrated drill guide: Thingiverse

Cart shell: Thingiverse

HDMI Cables

Thin ribbon cable: ebay