Wiring up ili9341 screen
Wiring up ili9341 screen
I was wondering if I want to use an ili9341 screen on the pi without the original controller board, do I have to use any resistors or other components, I’m curious because I’ve seen it done both ways.
- KonnorJ
- Posts: 385
- Joined: Thu Jan 11, 2018 1:23 am
- Location: United Kingdom
- Has thanked: 58 times
- Been thanked: 109 times
- Contact:
Re: Wiring up ili9341 screen
You'll need one 3r9 resistor if you dont use the ones with a board, alongside some sort of breakout of osh
Re: Wiring up ili9341 screen
This is really helpful, did you design that pcb? if so would you mind sending me the eagle files? Having an example would be super helpful.
- KonnorJ
- Posts: 385
- Joined: Thu Jan 11, 2018 1:23 am
- Location: United Kingdom
- Has thanked: 58 times
- Been thanked: 109 times
- Contact:
Re: Wiring up ili9341 screen
I didnt, but there are footprints available at github for these screens
Re: Wiring up ili9341 screen
If you follow this:viewtopic.php?t=2312 and use 18pin screen, the scheme will be as follows:
Last edited by Picicle on Sat May 25, 2019 12:43 pm, edited 1 time in total.
My project Picicle: https://www.sudomod.com/forum/viewtopic.php?f=38&t=7872
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Wiring up ili9341 screen
Not 10 ohms use 3.6ohm or 3.9ohms to have the proper backlight, using 10 ohms will slightly dim the backlight unless you want it that way.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest