Game Boy Zero case CAD files

Show off your completed Game Boy Zero, or post your build logs here!
Post Reply
User avatar
neolith
Posts: 182
Joined: Mon Apr 24, 2017 12:43 pm
Location: Germany
Has thanked: 94 times
Been thanked: 155 times

Game Boy Zero case CAD files

Post by neolith » Wed Aug 09, 2017 5:02 am

Hi everyone - I am not actually sure where to post this, but I hope this subforum is okay.

A couple of weeks ago I figured it would be fun to try my hand at CAD software. While I use 3D software almost daily I never really had a try at creating models for 3D printing or CNC. So to learn a software and to wrap my head around some of the concepts used in CAD I fooled around and created an almost complete model of a classic Game Boy case and while at it made it a Game Boy Zero.

The thing is – now that I am pretty much finished I have little use for it. I don't have a 3D printer and I haven't planned on creating an actual model from it for myself. So I figured maybe someone else might have use for it.
The measurements for this model have been taken from an original classic Game Boy DMG and I did my best to reproduce it as accurately as possible. Most parts should be placed correctly (that is down to a fifth of a mm) as long as they are possible to measure without destroying the case I used. However there is still a margin of error due to me making mistakes or parts being so inaccessible that I couldn't get a clear measurement and simply had to guess.

Also the model is not fully finished in and around the battery slot. This is because I still haven't built my first GBZ and was not quite sure which parts of it I would want to remove. On top of this right now the three parts of the model fit each other tightly in the software without even the slightest space in between. I do not have any experience in working on a usable model so that might turn out to be a small problem.

Furthermore I have not been able to actually test the model. As I mentioned I do not have access to a 3D printer.

The GBZ features so far include holes and mounting for additional buttons, large screen cutout and removal of the affected counterbores and the cutout for the USB needed for kite's SAIO board.

Soooo... to finish this – would anyone be interested in such a model? I would take the time to clean it up, add/remove features where possible and upload an STL or whatever format is best for printing.

Thoughts?

Image
more picturesShow
Image
Image
Image
update 2017_08_13Show
  • added a tiny bit of space between parts
  • added pins to hold the rubber buttons
  • added simple cuts to the battery slot
  • suppressed counterbores
Image
Image
update 2017_08_15Show
  • added supports left to battery bay
Image
update 2017_08_16Show
  • reworked the model hierarchy so that separate parts should be recognized by other programs
update 2017_08_20Show
  • moved lots of parts around slightly so that the model should fit kite's SAIO better
  • removed pins for additional rubber pads as they would interfere with the SAIO
  • added models for the x-pad, the AB-buttons, the on/off switch and the plug for the EXT.CONNECTOR slot in case anyone might ever need them (please note that most of those are at the origin, you might have to move them yourself before printing – for the .STLs everything is separated)
ImageImageImageImage
update 2017_12_09Show
  • fixed the bool error in the battery tray
update 2018_01_28Show
  • added details to the cartridge tray
Image
–––
DOWNLOADSShow
If you need formats not listed here, please post in this thread and I'll see if I can add them.

2018 01 28 – v62
.F3D, .SAT, .SKP, .STEP & separated .STL

2017 12 09 – v61
.F3D

2017 08 20 – v60
.SAT, .SKP, .STEP & separated .STL

2017 08 16 – v51
.SAT, .SKP & separated .STL

2017 08 15 – v50
.IGS, .SAT, .SKP, .SMT, .STEP & .STL

2017 08 13 – v48 (initial upload)
.IGS, .SAT, .SKP, .SMT, .STEP
Last edited by neolith on Sun Jan 28, 2018 10:13 am, edited 9 times in total.
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –

User avatar
abrugsch
Posts: 971
Joined: Tue Aug 02, 2016 10:00 am
Has thanked: 356 times
Been thanked: 430 times
Contact:

Re: Game Boy Zero case CAD files

Post by abrugsch » Wed Aug 09, 2017 6:14 am

That looks really really good. A few people have had a stab at doing this, but all of them have aborted before finishing them.
so yes, Please, finish cleaning up the model and share it if you want to do that.

I'm not sure how well it'll print, but I'd have a go at it. bear ini mind that with repro cases so cheap, most people are happy to just mod one of those. and printing one yourself with SLS (shapeways) still costs a lot more. FDM is cheap when you own (or have use of) a printer but would cost more than a repro case to get a [3D Hubs for instance] service to print it for you

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 688 times
Contact:

Re: Game Boy Zero case CAD files

Post by YaYa » Wed Aug 09, 2017 11:48 am

I can see many more usage to this than just printing to use it...
i have a lot of difficulties to setup my 3D parts to keep everything in place without any glue so this kind of model would help a lot because one can make a test fit of any type of component in 3D before digging in final assembly.

For now, i basically design my pieces, send them to my hub from 3DHubs, wait a while, pay a bit, receive the parts, test them, adjust, then send files for printing again. This is killing me and killing my wallet lol

I would love to have this model shared if you don't mind

Really good job !!!!!!!
Follow me on instagram Image

kubino
Posts: 205
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 149 times

Re: Game Boy Zero case CAD files

Post by kubino » Wed Aug 09, 2017 11:56 am

looks very good. Front half should be quite easy to print. if needed i can print it for you :-) back case is a bit problematic and lot of support will be needed.

User avatar
WLCD
Posts: 5
Joined: Tue Oct 11, 2016 6:26 am
Has thanked: 9 times
Been thanked: 3 times
Contact:

Re: Game Boy Zero case CAD files

Post by WLCD » Thu Aug 10, 2017 2:39 am

Same here, if you need any help printing, let me know :)

That's really nice work !

User avatar
neolith
Posts: 182
Joined: Mon Apr 24, 2017 12:43 pm
Location: Germany
Has thanked: 94 times
Been thanked: 155 times

Re: Game Boy Zero case CAD files

Post by neolith » Thu Aug 10, 2017 2:36 pm

Thanks for the compliments, guys. :)
I'll try to find some time this weekend to finish the model (aaand I just realized that I forgot the little pins that hold the silicone under the buttons). Is there anything else you'd like to see in the model? I think at least some holes for cables in the battery slot should be needed. Or would it be better to strip away most of that slot as some of the builds I've seen here do? What about counterbores? Is it a good idea to already have holes for the screws or would it be better to drill/melt them in later? What about their depth? Do the thin parts a little more support so they don't break?

@abrugsch:
Yeah, I am aware that this model is possibly useless due to cases so cheap and easily available. I got me some myself to build my GBZ and I never actually aimed to rival those. All I wanted to do was to try out a CAD software so that if I want to make my own case some time later I'd be able to (or at least be able to decide if that would be a futile attempt).

@YaYa:
That would actually a pretty cool use of the model – I never thought about that!

@kubino & WLCD:
Thanks for the kind offer, guys! I currently don't want this model printed for myself though. But I'll keep you in mind if I'll create one that I do want. :)
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 688 times
Contact:

Re: Game Boy Zero case CAD files

Post by YaYa » Thu Aug 10, 2017 2:39 pm

Please don't touch the battery tray lol. Many people take it off but some like me want stock look without butchering... lol

As for me, i don't care the hole for screws as i will never print it but i presume it would be better to let the holes blind so everyone can drill as needed
Follow me on instagram Image

Elmafioso90
Posts: 61
Joined: Thu Jun 01, 2017 3:09 pm
Has thanked: 26 times
Been thanked: 18 times

Re: Game Boy Zero case CAD files

Post by Elmafioso90 » Thu Aug 10, 2017 2:45 pm

How much would cost to get these made in good plastic in China like the original cases? I mean, it would be hella cool to get this made with mold casting (or whatever it is called) and get printed (like embedded in the case, not just regular ink) a nice "Sudomod's Game Boy Zero" instead of the Nintendo logo hahaha

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 688 times
Contact:

Re: Game Boy Zero case CAD files

Post by YaYa » Thu Aug 10, 2017 2:51 pm

It would cost a lot... the most expensive part of the work is the mold. I'm not sure the demand can make a convenient RIO on a mold
Follow me on instagram Image

User avatar
neolith
Posts: 182
Joined: Mon Apr 24, 2017 12:43 pm
Location: Germany
Has thanked: 94 times
Been thanked: 155 times

Re: Game Boy Zero case CAD files

Post by neolith » Thu Aug 10, 2017 3:05 pm

That's a fun idea, but I think that might be quite expensive – unless you order half a million parts or something like that.
IIRC such molds are made from thick metal blocks (two per model part) that need to be carved out so that they fit each other perfectly with the space for the model in between them so some machine can press hot polymer into that shape. There are videos on wikipedia on injection molding and how Lego bricks are made. The involved machines are quite massive and look freakishly expensive.
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest