Hi after a recommendation I bought https://de.aliexpress.com/item/WISECOCO ... 4c4dXeZs6r this from alienexpress.
After 3 months it finally arrived.
I was told to wire the yellow wire to my pi Zero - but there is no yellow wire. Also the board is 12V (I think it should 5V shouldn't it?)
What can I do to fix the 12V Problem ? Is there a manual for this board ?
If you have RGB Video - is there even a yellow wire because as you see on the photograph there is none
Please Help ! Problems with PD035VX2 Wiring with KYV-N2 V7
Please Help ! Problems with PD035VX2 Wiring with KYV-N2 V7
- Attachments
-
- IMG_20190413_125515.jpg (1.56 MiB) Viewed 11827 times
-
- IMG_20190413_125505.jpg (2.3 MiB) Viewed 11827 times
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Please Help ! Problems with PD035VX2 Wiring with KYV-N2 V7
Use this “AV1” wire for the composite Input, i bought recently something similar it should work off 5v give it a try..
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Please Help ! Problems with PD035VX2 Wiring with KYV-N2 V7
av1 -> video pi zero
if I would use a pi3 b+ where would I put it then?
It seems it does not matter which 12V and which GND I use... But should I connect 1 GND to my controllerboard (tinkerboy) and 1 to raspi as shown in the graph. If yes should I use both grounds from the Power supply part of the board?
if I would use a pi3 b+ where would I put it then?
It seems it does not matter which 12V and which GND I use... But should I connect 1 GND to my controllerboard (tinkerboy) and 1 to raspi as shown in the graph. If yes should I use both grounds from the Power supply part of the board?
- Attachments
-
- v2.0_screen_wiring.jpg (1.09 MiB) Viewed 11815 times
Re: Please Help ! Problems with PD035VX2 Wiring with KYV-N2 V7
If it will not work - what can I do to get my board working with only 12 V? or is it possible to convert the 5V to 12?
Who is online
Users browsing this forum: No registered users and 1 guest