Wiring Schema

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Wiring Schema

Post by yves1984 » Wed May 11, 2016 2:15 am

Some Topic has some wiring schema.

Is it possibel that we can do here a topic with all the wiring schema?

From Power to the complet wiring schema. i think that will be a good help for me and hope so other people ;)

User avatar
Fleder
Posts: 849
Joined: Thu May 05, 2016 9:04 am
Location: Germany
Has thanked: 183 times
Been thanked: 258 times

Re: Wiring Schema

Post by Fleder » Wed May 11, 2016 2:21 am

+1

Also, there is a website where you can create wiring diagrams
https://www.digikey.com/schemeit/project/

User avatar
1461748123
Posts: 143
Joined: Wed May 04, 2016 8:36 pm
Has thanked: 9 times
Been thanked: 17 times

Re: Wiring Schema

Post by 1461748123 » Wed May 11, 2016 2:45 am

That will be a pretty tough task
Since everyone are using different screens with different control boards, different button boards etc :)

User avatar
Fleder
Posts: 849
Joined: Thu May 05, 2016 9:04 am
Location: Germany
Has thanked: 183 times
Been thanked: 258 times

Re: Wiring Schema

Post by Fleder » Wed May 11, 2016 2:54 am

Oh, i thought he meant to collect the different wiring diagrams here.

yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Re: Wiring Schema

Post by yves1984 » Wed May 11, 2016 2:55 am

okay but the power and other parts are the same ;)

User avatar
Fleder
Posts: 849
Joined: Thu May 05, 2016 9:04 am
Location: Germany
Has thanked: 183 times
Been thanked: 258 times

Re: Wiring Schema

Post by Fleder » Wed May 11, 2016 3:09 am

So you roughly just want to know which part goes where?
Like, if you connect the display to the Pi0 or the Charger for power?

yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Re: Wiring Schema

Post by yves1984 » Wed May 11, 2016 3:13 am

i search something like this:
https://learn.adafruit.com/assets/18239

Because im not the best electron engineer and for me is something like this realy helpful.
There are many part to wiring like the Sound-regulator, or the booster... ;)

yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Re: Wiring Schema

Post by yves1984 » Wed May 11, 2016 6:25 am

I do a word doc (hope so with all my parts)
https://onedrive.live.com/redir?resid=E ... ile%2cdocx

has someone time to wire them, that i have a little help :roll:

i use just 2 buttons and no Tensee i use the GPIO from the RP0.
the big problem think is for me the audio wiring with this Volume switch the other part i think i saw something at google

User avatar
Fleder
Posts: 849
Joined: Thu May 05, 2016 9:04 am
Location: Germany
Has thanked: 183 times
Been thanked: 258 times

Re: Wiring Schema

Post by Fleder » Wed May 11, 2016 7:02 am

yves1984 wrote:I do a word doc (hope so with all my parts)
Please don't ever use Word if you can avoid it.

For Graphics use Pixlr: https://pixlr.com/
For Dokuments and Layouts use Lucidpress: https://www.lucidpress.com/pages/exampl ... e-software
(Lucidpress requires a free registration, though)

Both are web based programms, you can use without downloading anything.

Word is really bad in terms of like everything, and this is not just my opinion because i am a media designer :D

yves1984
Posts: 85
Joined: Thu May 05, 2016 7:55 am
Location: Zürich (Switzerland)
Has thanked: 13 times
Been thanked: 3 times
Contact:

Re: Wiring Schema

Post by yves1984 » Wed May 11, 2016 7:51 am

okay done it with https://pixlr.com/

The file that i do is this one https://onedrive.live.com/redir?resid=E ... file%2cpxd

sorry for my noobness paint :D

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest