[WANTED]: non-oem power switch and pot wheel

Post all "Looking to buy XYZ" threads here.
username 123
Posts: 134
Joined: Thu Jun 09, 2016 5:45 pm
Has thanked: 33 times
Been thanked: 29 times

[WANTED]: non-oem power switch and pot wheel

Post by username 123 » Sat Aug 13, 2016 9:11 am

Hi fellow sudo modders! I am building a non-oem gbz and need two final pieces for my build. I need a power switch with the same throw length of the original power switch and one potentiometer volume wheel close to the same thickness of the oem wheel.

PM me what to have. I am located in the USA.
Thank you!

sokignano
Posts: 22
Joined: Mon Aug 08, 2016 7:12 am
Has thanked: 5 times
Been thanked: 4 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by sokignano » Sat Aug 13, 2016 1:00 pm

Honestly I got all of my small bits on Aliexpress and it ran about 29 with epacket shipping. But i made sure all the stuff I got was from the same seller. I got my shell, two sets of buttons, potentiometer (vol wheel), speaker, game cart for sd pcb, and two sets of slilcone rubber pads and it ran right at 25 bucks.

username 123
Posts: 134
Joined: Thu Jun 09, 2016 5:45 pm
Has thanked: 33 times
Been thanked: 29 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by username 123 » Sat Aug 13, 2016 11:21 pm

Thanks. I'm more worried about getting a switch with a shorter throw. Someone posted up some switches that is a pretty close match but the seller doesn't ship to the USA.
Have you tried the switches you got?

sokignano
Posts: 22
Joined: Mon Aug 08, 2016 7:12 am
Has thanked: 5 times
Been thanked: 4 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by sokignano » Sun Aug 14, 2016 2:05 am

honestly, I broke down and looked for a broke DMG on ebay and found one with a carrying case and two games for 15 lol the shell is in great condition. and I plan to gut the stuff i need off of it. Power Switch, Cartridge connector, and headphone jack. everything else is going the way of the dodo :) But there was a guy that found a side mounted double pole single throw that is really close.

User avatar
Camble
Posts: 885
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 488 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by Camble » Sun Aug 14, 2016 6:06 am

These are the switches I use.

The part number is SK22H03

Be careful. There are a few variants of this switch and the one pictured here may be discontinued. I ordered a bunch from Aliexpress and they sent a different switch. SK-22H07 is a suitable alternative.
Last edited by Camble on Tue Aug 23, 2016 2:14 am, edited 1 time in total.

sokignano
Posts: 22
Joined: Mon Aug 08, 2016 7:12 am
Has thanked: 5 times
Been thanked: 4 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by sokignano » Sun Aug 14, 2016 8:17 am

Thank you Camble for the information! Now, I wish i hadn't picked up the DMG off eBay lol. But username 123 if you are in the states just go to ebay.com and search for the part number Camble provided :)

username 123
Posts: 134
Joined: Thu Jun 09, 2016 5:45 pm
Has thanked: 33 times
Been thanked: 29 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by username 123 » Sun Aug 14, 2016 9:00 am

I've already searched that part number on eBay and it only show two results. None of which look like the one posted here.

User avatar
Camble
Posts: 885
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 488 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by Camble » Sun Aug 14, 2016 9:15 am

@username_123 There are a few variants of the switch, but the pins should be the same.

Searching eBay.com with the part number doesn't yield any results for me. Try searching for "DPDT slide switch" or look on Amazon.

sokignano
Posts: 22
Joined: Mon Aug 08, 2016 7:12 am
Has thanked: 5 times
Been thanked: 4 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by sokignano » Sun Aug 14, 2016 9:35 am

Is this the switch that we would need?

http://www.ebay.com/itm/20Pcs-6mm-High- ... SwdrRXGHJb

User avatar
Camble
Posts: 885
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 488 times

Re: [WANTED]: non-oem power switch and pot wheel

Post by Camble » Sun Aug 14, 2016 10:19 am

@sokignano Yes.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest