All in One PCB Support Thread

[walternate]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

[BempaG]

How do you have the 5V and GND connected ? are the GND connected to the AIO and Pi the same? Also be sure PP23 isn't touching that GND pad to the left of it.

5V and GND is conected from powerboost.
Aio and pi have the same GND from powerboost.
PP23 is not touching GND (controled whit multimeter)

[Helder]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

This isn't a request thread so don't post these things here.

How do you have the 5V and GND connected ? are the GND connected to the AIO and Pi the same? Also be sure PP23 isn't touching that GND pad to the left of it.

5V and GND is conected from powerboost.
Aio and pi have the same GND from powerboost.
PP23 is not touching GND (controled whit multimeter)

I would remove the Screen from the equation and just power the pi and AIO and hook up the Pi to HDMI. Remove the powerboost from the equation and power the pi with a USB power brick. Try to eliminate all causes one by one then we can see if it's the AIO or something else.

[walternate]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

This isn't a request thread so don't post these things here.

I meant...one stick. Pretty sure you know from my posts that I have not been asking for a thing.

[BempaG]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

This isn't a request thread so don't post these things here.

How do you have the 5V and GND connected ? are the GND connected to the AIO and Pi the same? Also be sure PP23 isn't touching that GND pad to the left of it.

5V and GND is conected from powerboost.
Aio and pi have the same GND from powerboost.
PP23 is not touching GND (controled whit multimeter)

I would remove the Screen from the equation and just power the pi and AIO and hook up the Pi to HDMI. Remove the powerboost from the equation and power the pi with a USB power brick. Try to eliminate all causes one by one then we can see if it's the AIO or something else.

Nop no luck.
Removed screen and powerboost and stil no respons from aio.
Powered it from USB power brick.

[Helder]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

This isn't a request thread so don't post these things here.

5V and GND is conected from powerboost.
Aio and pi have the same GND from powerboost.
PP23 is not touching GND (controled whit multimeter)

I would remove the Screen from the equation and just power the pi and AIO and hook up the Pi to HDMI. Remove the powerboost from the equation and power the pi with a USB power brick. Try to eliminate all causes one by one then we can see if it's the AIO or something else.

Nop no luck.
Removed screen and powerboost and stil no respons from aio.
Powered it from USB power brick.

Last thing to try is to see if you can connect the AIO to a PC USB port and see if it detects the hub and Arduino Controller.

[Chedda]

Thank you for doing good work. I missed the first 2 pre-orders. I will for sure order one today. You make life so much easier. I will be doing my second build with this board.

[Helder]

Thank you for doing good work. I missed the first 2 pre-orders. I will for sure order one today. You make life so much easier. I will be doing my second build with this board.

Preorders are up now.

[KaiKona808]

Because two is better than one! WE WANT MOAR THINGS!!! WE WANT IT TO GO TO 11!!!!!!

I just want one myself.

This isn't a request thread so don't post these things here.

5V and GND is conected from powerboost.
Aio and pi have the same GND from powerboost.
PP23 is not touching GND (controled whit multimeter)

I would remove the Screen from the equation and just power the pi and AIO and hook up the Pi to HDMI. Remove the powerboost from the equation and power the pi with a USB power brick. Try to eliminate all causes one by one then we can see if it's the AIO or something else.

Nop no luck.
Removed screen and powerboost and stil no respons from aio.
Powered it from USB power brick.

Having same issue as you it seems. So going to do what @Helder mentioned and test each piece. But I figures strip it all first. Just got done desoldering and cleaning all connection points and stripping new wires. Hey gives me something to do while I wait for Version 2.

[Helder]

Having same issue as you it seems. So going to do what @Helder mentioned and test each piece. But I figures strip it all first. Just got done desoldering and cleaning all connection points and stripping new wires. Hey gives me something to do while I wait for Version 2.

Try it on the PC first and if doesn't work there or gives some error then the resonator on the left side will need to be reflowed with a solder iron or hot air gun.

I'll explain that once you guys test it on the PC and let me know what the outcome is.