BadBert's GBZ Build

Camble · Post by **Camble** » Sun Oct 30, 2016 8:15 am

@Zero @BadBert There are tonnes of great push-button solutions out there, and some of them quite simple. With the PowerBoost, it can be as simple as pulling the EN pin up to battery voltage for a brief moment. The problem we have is that the GBZ uses a slide switch, and not a momentary one.

yves1984 · Post by **yves1984** » Wed Nov 02, 2016 1:02 pm

BadBert wrote:Ok.... my thoughts to how to hook up the speaker were wrong (using stereo)..

so i looked at some diagrams of the headphone jack.... and all of a sudden it occured to me

so i hooked everything for the audio up once more, and YEAH!!!! SOUND!!!! ok... it was really faint, so i put in the amp, and damn! It worked
victory! hhahahahha

only thing that is not working now is the wifi.

screen resolution etc are good now. picture is nice enough

At first: NICE work!

have u also do a schema from your wiring now?
because i got the same hardware like you

BadBert · Post by **BadBert** » Thu Nov 03, 2016 2:20 am

@yves1984 thanks!
i will try to draw something up as soon as i can

peoplesbeer · Post by **peoplesbeer** » Thu Nov 03, 2016 5:53 am

Wooh I'd like to see some wiring diagram as well! Been trying to zoom and look at your pictures and it works great, most of the time, but not always.

Thanks for the tip on the other LED status indicator board, didn't hesitate to order one.

BadBert · Post by **BadBert** » Thu Nov 03, 2016 6:08 am

@peoplesbeer no problem

i'll draw something up today or tomorrow. Only thing i have to check is where on the original headphone jack i soldered everything to....

I am using stereo sound (also on the speaker!)

cobramike · Post by **cobramike** » Thu Nov 03, 2016 7:06 am

BadBert wrote:@peoplesbeer no problem

i'll draw something up today or tomorrow. Only thing i have to check is where on the original headphone jack i soldered everything to....
I am using stereo sound (also on the speaker!)

Great to see some drawing. Can`t wait for that. Nice build by the way.

vnman · Post by **vnman** » Thu Nov 03, 2016 8:19 am

@badbert, maybe you can put under here http://sudomod.com/forum/viewtopic.php?f=22&t=1715 your vesion of wiring diagram.

I'll put mine there as soon as I have the time

BadBert · Post by **BadBert** » Fri Nov 04, 2016 2:29 am

@cobramike thanks

ill check my wiring this weekend, and post the info here

@vnman good tip! i'll post the diagram there to!

peoplesbeer · Post by **peoplesbeer** » Wed Nov 09, 2016 1:21 pm

Having a long weekend or just busy?

BadBert · Post by **BadBert** » Thu Nov 10, 2016 6:52 am

peoplesbeer wrote:Having a long weekend or just busy?

sorry.... really busy...

i HOPE to have some spare time this weekend...... sorry guys.

BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Re: BadBert's GBZ Build

Who is online