BW screen variant 9 board

Cellsenshi · Post by **Cellsenshi** » Fri Jan 06, 2017 1:24 pm

Hi guys !

I bought a BW lcd screen and I got the variant 9 board inside. The screen flickes when powered with 5v, does anyone found an issue to make it work ? Thanks for your help !

joeygbsn · Post by **joeygbsn** » Sat Jan 07, 2017 1:34 pm

http://sudomod.com/forum/viewtopic.php?f=8&t=2110

This thread will help you. Just did this to my v9 screen the other day and can confirm it works fine.

Cellsenshi · Post by **Cellsenshi** » Sun Jan 08, 2017 7:34 am

Ok thanks for your help dude, I'll try this evening.

Cellsenshi · Post by **Cellsenshi** » Tue Jan 10, 2017 1:57 am

It works fine, thanks for your help !

Glyph · Post by **Glyph** » Fri Jan 13, 2017 1:13 pm

Hi
Can you tell me where you bought it ?
It's hard to find one with the button board in Canada...
Thanks

joeygbsn · Post by **joeygbsn** » Fri Jan 13, 2017 8:35 pm

I got mine from Amazon. I just got the one with prime shipping so not sure which seller it was.

Cellsenshi · Post by **Cellsenshi** » Sun Jan 15, 2017 3:40 pm

Glyph wrote:Hi
Can you tell me where you bought it ?
It's hard to find one with the button board in Canada...
Thanks

Hi !

I bought mine on Amazon.fr :
https://www.amazon.fr/gp/product/B006MP ... UTF8&psc=1

JohnTheKing · Post by **JohnTheKing** » Sat Apr 15, 2017 1:52 pm

I just got my screen today. I got variant 9.
According to http://sudomod.com/wiki/index.php?title ... t-9_5V.jpg I will to remove the chip and solder in 5v.
On the image of yours it looks like you did not have to do that and you are able to use it for games just fine.
Did you just attach the red wire and hook it up to your pi and it started working or is it going to be necessary to remove the chip in order to use this screen?

VeteranGamer · Post by **VeteranGamer** » Sat Apr 15, 2017 3:02 pm

JohnTheKing wrote: ↑
Sat Apr 15, 2017 1:52 pm
I just got my screen today. I got variant 9.
According to http://sudomod.com/wiki/index.php?title ... t-9_5V.jpg I will to remove the chip and solder in 5v.
On the image of yours it looks like you did not have to do that and you are able to use it for games just fine.
Did you just attach the red wire and hook it up to your pi and it started working or is it going to be necessary to remove the chip in order to use this screen?

no need to remove the chip, just solder a jumper to it and your good to go...

oliddell · Post by **oliddell** » Tue May 02, 2017 9:20 am

Hi, i just got this variant (9)to day, the 5v is soldieried to which pin on the chip, as the pin you used is different from the wiki. Thanks a lot

BW screen variant 9 board

BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Re: BW screen variant 9 board

Who is online