[For Sale] Tactile ShoulderBracket

Sell or trade things with other forum members!
User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [Gauging Interest] L and R button Bracket

Post by erik_gee » Thu Jul 06, 2017 11:46 am

It looks like as of now, there is some small interest. So at the very least , I'll have a short run production for those interested . I'm gonna wait a little longer to get more comments from the rest of the community. I'll also check at my post office to see how much to ship is and get a more finite sale price going. Thank you all for your input so far! Please if you have any other input go right ahead and comment !
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

canzilla
Posts: 3
Joined: Tue Jun 20, 2017 3:59 pm
Location: Toronto
Has thanked: 6 times

Re: [Gauging Interest] L and R button Bracket

Post by canzilla » Thu Jul 06, 2017 1:19 pm

Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I am interested in 1 or 2 sets.
Looking forward for the update :)

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [Gauging Interest] L and R button Bracket

Post by erik_gee » Thu Jul 06, 2017 2:00 pm

canzilla wrote:
Thu Jul 06, 2017 1:19 pm
Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I am interested in 1 or 2 sets.
Looking forward for the update :)
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

Elmafioso90
Posts: 61
Joined: Thu Jun 01, 2017 3:09 pm
Has thanked: 26 times
Been thanked: 18 times

Re: [Gauging Interest] L and R button Bracket

Post by Elmafioso90 » Thu Jul 06, 2017 2:39 pm

canzilla wrote:
Thu Jul 06, 2017 1:19 pm
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
The only problem with Kite's SAIO is that you will have to decide between having these shoulder buttons or to keep the NDSL GBA cartridge.

Unless you want to use the PRS Tech custom cartridge reader, you can always glue the cartridge to keep the aesthetics and have fully functional buttons.

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [Gauging Interest] L and R button Bracket

Post by erik_gee » Thu Jul 06, 2017 3:10 pm

Elmafioso90 wrote:
Thu Jul 06, 2017 2:39 pm
canzilla wrote:
Thu Jul 06, 2017 1:19 pm
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
The only problem with Kite's SAIO is that you will have to decide between having these shoulder buttons or to keep the NDSL GBA cartridge.

Unless you want to use the PRS Tech custom cartridge reader, you can always glue the cartridge to keep the aesthetics and have fully functional buttons.
Right. I think that was mentioned earlier about the cartridge reader. As long as the board itself isn't affected then that is good. Personally I don't touch my SD card after Initial setup as I have no need for it. But I use the shoulder buttons all the time, so I'd rather have comfortable buttons over removable SD card, but everyone is different location. Thank you for your input!
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

skimzor
Posts: 12
Joined: Mon Aug 08, 2016 10:35 pm
Has thanked: 1 time

Re: [Gauging Interest] L and R button Bracket

Post by skimzor » Thu Jul 06, 2017 6:38 pm

I'm in for just the bracket or the set if you decide to make that available. Thanks!

Dukana
Posts: 80
Joined: Wed Sep 07, 2016 11:45 am
Has thanked: 51 times
Been thanked: 29 times

Re: [Gauging Interest] L and R button Bracket

Post by Dukana » Thu Jul 06, 2017 7:54 pm

erik_gee wrote:
Thu Jul 06, 2017 3:10 pm

Right. I think that was mentioned earlier about the cartridge reader. As long as the board itself isn't affected then that is good. Personally I don't touch my SD card after Initial setup as I have no need for it. But I use the shoulder buttons all the time, so I'd rather have comfortable buttons over removable SD card, but everyone is different location. Thank you for your input!
I'm with you. While there is a cool novelty factor in having the micro SD in a game cart, it's not very useful or practical, and it's a major pain to get perfect! Most builds will utilize the Zero W, so you can adjust files via wifi.

If you're using one of Kites SAIO kits, the micro SD is already moved to the side, making it easily accessible.

MasterfulMonkey
Posts: 2
Joined: Fri Jun 16, 2017 2:36 pm

Re: [Gauging Interest] L and R button Bracket

Post by MasterfulMonkey » Fri Jul 07, 2017 12:11 am

I really like this, as a lot of other button methods seem forced or unaesthetic.

User avatar
erik_gee
Posts: 356
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 137 times
Been thanked: 193 times

Re: [Gauging Interest] L and R button Bracket

Post by erik_gee » Fri Jul 07, 2017 1:28 am

MasterfulMonkey wrote:
Fri Jul 07, 2017 12:11 am
I really like this, as a lot of other button methods seem forced or unaesthetic.
Thank you! Put a bit of time into it to make it functional and easy on the eyes haha you should see the prototypes, basically just blocks at that point :lol:
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928

Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192

AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811

User avatar
neolith
Posts: 186
Joined: Mon Apr 24, 2017 12:43 pm
Location: Germany
Has thanked: 101 times
Been thanked: 160 times

Re: [Gauging Interest] L and R button Bracket

Post by neolith » Fri Jul 07, 2017 2:10 am

canzilla wrote:
Thu Jul 06, 2017 1:19 pm
Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I'm in the same boat and very interested in buying this (prefereably as a kit).
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –

Post Reply

Who is online

Users browsing this forum: DaRk_dOg, Google Adsense [Bot], Raft and 1 guest