Wii U - Raspberry - WiP

[Marty33]

After discover the project of @Banjokazooie, and after to release a GameBoy Zero, i must to look this project !

I buy all and i use this topic to share the progress and help others on this fabulous project.

You will understand... I fell in love of this Wii U Gamepad !

-----------------------

I want to use this part. It maintains the buttons PCB in place but i remove all the parts on it.


I use this FFC FPC adapter : https://goo.gl/mA1w1U
I found the GND on 1/2/3. TV button on 6. Amber led on 11. Red led on 12. Power button on 15. Home button on 16 (19/20 not used, logic)


Impossible to found the 2 blue led. I solder directly on the PCB. All is ok


The support where everything will come graft.




Sorry for bad english

Stay connected

[reke]

mah men, where did you get the fpc adapter??

[Marty33]

On Aliexpress. Look in my first post, link is for you

[reke]

ih, i see, and the cable?? its original from the gamepad?

[jostie94]

Wher did you buy the controller housing and buttons?

[Marty33]

@reke : Yes, it's the original. I have it with the Power Switch PCB : https://goo.gl/v6szAe

@jostie94 : The controller was found on Ali : https://goo.gl/ea3yJv and button were found on Ebay.

-------------------

I fix the screen's motherboard and the PI3 with Nylon Screw and Epoxy (it's the first time i use this glue) and... it's work. Very solid.

Little bolts and it's ok

I repeat... big thanks @Banjokazooie

[reke]

any update??

[Marty33]

Hello

Very little. For the moment, i wait the batteries : https://goo.gl/erLCgy

The batteries will take up a lot of space and i still have a lot of things to place, i still do not know how to do it...

I removed the inside of the back of the controller and place a very little detail (but important ! ).


And here, all the components (i wait the Jack 5pins)

[reke]

Hello

Very little. For the moment, i wait the batteries : https://goo.gl/erLCgy

The batteries will take up a lot of space and i still have a lot of things to place, i still do not know how to do it...

I removed the inside of the back of the controller and place a very little detail (but important ! ).


And here, all the components (i wait the Jack 5pins)

uff man, its a lot of work, in the beginning of the next month, ill qork on tje wii u gamepad, but i dont know nothing of circuits, i want to use a 10000 mah li-po but dont know what i need jajaja, ill keep searching more info, in your configuration its the home button usable?

thanx for all

[LordDarkScream]

Keep use updated